JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU Instant Timer Recording ITR, Watching Another

Page 19

 

EN 19

Recording Features

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours

 

(selectable in 30-min. increments), and shuts the recorder off

 

after recording is finished.

 

1 Start recording.

 

Press 7 on the recorder.

 

2 Engage the ITR mode.

 

Press 7 again. “” blinks and 0:30 appears on the front

 

display panel.

 

3 Set the recording duration.

 

If you want to record for more than 30 minutes, press 7

 

to extend the time. Each press extends recording time by

 

30 minutes.

 

NOTE:

 

You can only perform ITR using the 7 button on the recorder’s

 

front panel.

 

Record One Programme While

 

Watching Another

 

If your recorder is connected to the TV via the AV

 

connection, press TV/VCR. The recorder’s VCR indicator

 

and the TV broadcast being recorded disappear. Once

 

recording is in progress, all you need to do is to set the

 

channel controls on the TV for the station you wish to

 

view.

 

The programme selected with the TV’s channel controls

 

appears on the TV screen, while the one selected with the

 

recorder’s PR buttons is recorded on the tape.

 

If a decoder is connected to the recorder ( pg. 32), you can

 

select a scrambled channel as well with the TV channel

 

controls.

Image 19
Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVBefore starting, make sure of the following Auto Set UpTurn on the recorder Select your countryOn the on-screen display Perform Auto Set UpSelect the language On the front display panelPress rt to select CH - and press OK or e Perform Preset Download10 EN Set the video channelJust Clock Language for the on-screen display12 EN Access the Main Menu screenAccess the Country Set screen LanguageDirect Rec NexTView Link TV Auto Power OnLink Functions VCR Auto Standby14 EN Basic PlaybackPause during playback Slow MotionHigh-Speed Search Variable Speed SearchManual Tracking 16 ENInstant ReView Repeat Playback Index SearchSkip Search Next Function Memory18 EN Set the recording duration Instant Timer Recording ITREngage the ITR mode Watching AnotherDisplay the counter Reset the counter20 EN Tape Remaining TimeRecording PlaybackEnter the Showview number Access the Showview screenBefore performing the Showview Timer Programming 22 ENPress VPS/PDC to select on or OFF Set the VPS/PDC modeEngage the recorder’s timer mode Press SP/LP p24 EN Express Timer ProgrammingPress PR + To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionDisengage the timer mode Check, cancel and change programmesCancel or change a programme Return to the timer modeConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify 28 EN Select the L-2 Select modeEngage the Auto Satellite Programme Recording mode Programme RecordingEdit From a Camcorder Start the source player Set the input mode of recording deckAnother Video Recorder 30 ENConnecting To a Satellite Receiver Set the tuner Select the input mode32 EN Connect the decoderGuide Program Number Showview System SetupAccess the Initial Set screen Guide Program Number SetSelect the mode setting Mode SetAccess the Mode Set screen Select the modeOff, and automatically disengaged when the recorder is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture When this function is set to ON, the timer isFor Example 36 ENAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 38 ENView the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 40 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 42 ENSet Stations B Station Name TV Station And ID ListClock Set Access the Clock Set screen44 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data46 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetPower Recording 48 ENOther Problems Playback 50 ENWatching Another Auto Channel Set Auto Set UpConnecting To a Satellite Receiver Timer warning display Tuner SetLP HR-J480EU only 480 min. with E-240 video cassette Signal systemMonochrome signal, 625 lines Memory backup time Approx min