EN 9
C Select the language.
Press OK. The Language Set display appears on the TV screen.
Press rt to move the highlight bar (pointer) to the language of your choice.
(Example) DEUTSCH is selected.
D Perform Auto Set Up.
Press OK. The AUTO
On the front display panel
Press rt to select “Auto” and press OK or e.
On the on-screen display
Press rt to move the highlight bar (pointer) to “AUTO SET” and press OK or e.
“Auto” blinks on the front display panel; do NOT press any button on the recorder or remote control until the front display panel shows clock time, “(CH) 1” or
“– –:– –” as illustrated on page 11.
●If you are using the
display, the AUTO SET |
|
|
screen will appear. As Auto |
|
|
Set Up progresses, the “q” |
|
|
mark on the TV screen |
|
|
moves from left to right. |
|
|
When the Auto Set Up is |
|
|
completed, “SCAN |
|
|
COMPLETED” appears for |
|
|
about 5 seconds, then the | Beginning | End |
normal screen appears. |
●When you have connected the video recorder to a TV offering
the TV is turned on, the recorder automatically performs the Preset Download ( pg. 10) even if you select “Auto” for Auto Set Up function.
ATTENTION
Once you have performed Auto Set Up, even if the recorder’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the recorder’s memory and the recorder will not perform Auto Set Up again. You only need to set the clock. ( pg. 44)
If you have moved to a different area, perform each setting as required.
●Video channel setting (for RF connection users) pg. 46
●Tuner setting pg. 38
●Clock setting pg. 44
If a new station starts broadcasting in your area, perform tuner setting ( pg. 38) and, if necessary, video channel setting ( pg. 46).
NOTES:
●In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the recorder can perform neither Auto Clock Set nor Auto Guide Program Number Set.
●If there is a power cut, or if you press 1 or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again from step 1.
●Auto Clock Set may not function properly depending on the reception condition.
●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels ( pg. 41, “INFORMATION”).