JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU Perform Auto Channel Set, Press OK twice

Page 39

EN 39

IMPORTANT

●In certain reception conditions, station names may not be stored correctly, and Auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the SHOWVIEW system, the recorder will record a TV programme of a different station. When programming the

timer using the SHOWVIEW system, be sure to check the desired channel is selected correctly ( pg. 22, “SHOWVIEW® Timer Programming”).

●Your video recorder memorizes all detected stations even if

reception of some of them is poor. You can delete those stations with an unacceptable picture ( pg. 41, “Delete A Channel”).

NOTES:

●Fine tuning is performed automatically during Auto Channel Set. If you want to perform it manually, refer to page 42.

●If you perform Auto Channel Set when the aerial cable is not connected properly, “SCAN COMPLETED -NO SIGNAL-” appears on the TV screen in step 7. When this happens, make sure of the aerial connection and press OK; Auto Channel Set will take place again.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels ( pg. 41, “INFORMATION”).

F Perform Auto Channel Set.

Press OK twice.

● If you have connected the

 

 

recorder and your TV via AV

 

 

connection ( pg. 7), the

 

 

recorder automatically

 

 

performs the Preset

 

 

Download and the T-V LINK

 

 

screen will appear

 

 

( pg. 10).

 

 

● The Auto Set screen appears,

Beginning

End

and remains on screen while

the recorder searches for receivable stations.

As Auto Channel Set progresses, the “q” mark on the TV screen moves from left to right. Wait until the TV screen as shown in step 7 appears.

G View the Confirmation screen.

After “SCAN COMPLETED” is displayed on the TV screen for about 5 seconds, the Confirmation screen looking like the one to the right appears. The stations your recorder located appear on a Confirmation screen — channel positions (PR),

channels (CH) and station names (ID –  pg. 43). The blueback screen and the programme currently being broadcast by the blinking station appear alternately for 8 seconds each. To view the next page, use the rt w e button on the remote control.

●The stations located in the selected country appear at the top of the list.

●The Guide Program numbers will also be set automatically during Auto Channel Set.

H Return to the normal screen.

Press MENU.

●Using the Confirmation screen, you can skip or add channel positions, enter station names and perform other operations. Refer to pages 40 – 43 for the procedures.

●Depending on reception conditions, the stations may not be stored in order, and the station names may not be stored correctly.

●For information on scrambled broadcasts, refer to page 41.

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVBefore starting, make sure of the following Auto Set UpTurn on the recorder Select your countryOn the on-screen display Perform Auto Set UpSelect the language On the front display panelPress rt to select CH - and press OK or e Perform Preset Download10 EN Set the video channelJust Clock Language for the on-screen display12 EN Access the Main Menu screenAccess the Country Set screen LanguageDirect Rec NexTView Link TV Auto Power OnLink Functions VCR Auto Standby14 EN Basic PlaybackPause during playback Slow MotionHigh-Speed Search Variable Speed Search16 EN Manual TrackingInstant ReView Repeat Playback Index SearchSkip Search Next Function Memory18 EN Set the recording duration Instant Timer Recording ITREngage the ITR mode Watching AnotherDisplay the counter Reset the counter20 EN Tape Remaining TimeRecording PlaybackEnter the Showview number Access the Showview screenBefore performing the Showview Timer Programming 22 ENPress VPS/PDC to select on or OFF Set the VPS/PDC modeEngage the recorder’s timer mode Press SP/LP p24 EN Express Timer ProgrammingPress PR + To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionDisengage the timer mode Check, cancel and change programmesCancel or change a programme Return to the timer modeCancel or change programme setting Confirm the overlapping programmesSelect the programme to modify 28 EN Select the L-2 Select modeEngage the Auto Satellite Programme Recording mode Programme RecordingEdit From a Camcorder Start the source player Set the input mode of recording deckAnother Video Recorder 30 ENConnecting To a Satellite Receiver Set the tuner Select the input mode32 EN Connect the decoderGuide Program Number Showview System SetupAccess the Initial Set screen Guide Program Number SetSelect the mode setting Mode SetAccess the Mode Set screen Select the modeOff, and automatically disengaged when the recorder is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture When this function is set to ON, the timer is For Example 36 ENAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 38 ENPerform Auto Channel Set View the Confirmation screenPress OK twice Manual Channel Set 40 ENDelete a Channel When Receiving a Scrambled Broadcast42 EN Set Stations aSet Stations B Station Name TV Station And ID ListAccess the Clock Set screen Clock Set44 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data46 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetPower Recording 48 ENOther Problems Playback 50 ENWatching Another Auto Channel Set Auto Set UpConnecting To a Satellite Receiver Timer warning display Tuner SetLP HR-J480EU only 480 min. with E-240 video cassette Signal systemMonochrome signal, 625 lines Memory backup time Approx min
Top Page Image Contents