JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU specifications Express Timer Programming, 24 EN

Page 24

24 EN

TIMER RECORDING (cont.)

Express Timer

Programming

Before performing Express Timer Programming:

●Make sure that the recorder’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the video channel (or AV mode).

If you don’t know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

A Access the SHOWVIEW screen.

Press PROG.

B Access the Programme screen.

Press START +/–. (If you’re just starting out, “P1” appears.)

C Enter the programme start time.

Press START +/– to enter the time you want recording to start.

●Press and hold START +/– to

move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

D Enter the programme stop time.

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

E Enter the programme date.

Press DATE +/–.

●The current date appears on the TV screen. The date you enter appears in its place.

Image 24

Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsCheck the contents Situate the recorderConnect the recorder to TV Connect the recorder to mainsAuto Set Up Turn on the recorderSelect your country Before starting, make sure of the followingPerform Auto Set Up Select the languageOn the front display panel On the on-screen displayPerform Preset Download 10 ENSet the video channel Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockAccess the Main Menu screen Access the Country Set screenLanguage 12 ENNexTView Link TV Auto Power On Link FunctionsVCR Auto Standby Direct RecBasic Playback 14 ENSlow Motion High-Speed SearchVariable Speed Search Pause during playback16 EN Manual TrackingInstant ReView Index Search Skip SearchNext Function Memory Repeat Playback18 EN Instant Timer Recording ITR Engage the ITR modeWatching Another Set the recording durationReset the counter 20 ENTape Remaining Time Display the counterPlayback RecordingAccess the Showview screen Before performing the Showview Timer Programming22 EN Enter the Showview numberSet the VPS/PDC mode Engage the recorder’s timer modePress SP/LP p Press VPS/PDC to select on or OFFExpress Timer Programming 24 ENTo Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR +Check, cancel and change programmes Cancel or change a programmeReturn to the timer mode Disengage the timer modeCancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Select the L-2 Select mode Engage the Auto Satellite Programme Recording modeProgramme Recording 28 ENEdit From a Camcorder Set the input mode of recording deck Another Video Recorder30 EN Start the source playerConnecting To a Satellite Receiver Select the input mode 32 ENConnect the decoder Set the tunerShowview System Setup Access the Initial Set screenGuide Program Number Set Guide Program NumberMode Set Access the Mode Set screenSelect the mode Select the mode settingYou can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is36 EN For ExampleAbout Ntsc Playback Access the Auto Channel Set screen Tuner Set38 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice 40 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a Channel42 EN Set Stations aSet Stations B TV Station And ID List Station NameAccess the Clock Set screen Clock Set44 EN Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 46 ENPower 48 EN RecordingOther Problems 50 EN PlaybackAuto Channel Set Auto Set Up Connecting To a Satellite ReceiverTimer warning display Tuner Set Watching AnotherSignal system Monochrome signal, 625 linesMemory backup time Approx min LP HR-J480EU only 480 min. with E-240 video cassette