JVC HR-J480EU 22 EN, Access the Showview screen, Enter the Showview number, Press Prog

Page 22

22 EN

TIMER RECORDING

SHOWVIEW® Timer Programming

Before performing the SHOWVIEW Timer

Programming:

●Make sure that the recorder’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the video channel (or AV mode).

With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognize.

A Access the SHOWVIEW screen.

Press PROG.

B Enter the SHOWVIEW number.

Press the NUMBER keys to enter the SHOWVIEW number of a programme you wish to record.

●If you make a mistake, press & and input the correct number.

C Access the SHOWVIEW Program screen.

Press OK, then the

SHOWVIEW Program screen appears (if you’re just starting out, “P1” appears).

IMPORTANT

Make sure the channel position number you wish to record is displayed; if not, see “SHOWVIEW® System Setup” on page 33 and set the Guide Program number correctly.

●If the number you entered is invalid, “ERROR” appears on the TV screen. Press & and input a valid SHOWVIEW number.

●If the “GUIDE PROG SET” screen appears, see “ATTENTION” on page 23.

Image 22

Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsConnect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mainsSelect your country Auto Set UpTurn on the recorder Before starting, make sure of the followingOn the front display panel Perform Auto Set UpSelect the language On the on-screen displaySet the video channel Perform Preset Download10 EN Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockLanguage Access the Main Menu screenAccess the Country Set screen 12 ENVCR Auto Standby NexTView Link TV Auto Power OnLink Functions Direct RecBasic Playback 14 ENVariable Speed Search Slow MotionHigh-Speed Search Pause during playbackManual Tracking 16 ENInstant ReView Next Function Memory Index SearchSkip Search Repeat Playback18 EN Watching Another Instant Timer Recording ITR Engage the ITR mode Set the recording durationTape Remaining Time Reset the counter20 EN Display the counterPlayback Recording22 EN Access the Showview screenBefore performing the Showview Timer Programming Enter the Showview numberPress SP/LP p Set the VPS/PDC modeEngage the recorder’s timer mode Press VPS/PDC to select on or OFFExpress Timer Programming 24 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR +Return to the timer mode Check, cancel and change programmesCancel or change a programme Disengage the timer modeConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Programme Recording Select the L-2 Select modeEngage the Auto Satellite Programme Recording mode 28 ENEdit From a Camcorder 30 EN Set the input mode of recording deckAnother Video Recorder Start the source playerConnecting To a Satellite Receiver Connect the decoder Select the input mode32 EN Set the tunerGuide Program Number Set Showview System SetupAccess the Initial Set screen Guide Program NumberSelect the mode Mode SetAccess the Mode Set screen Select the mode settingWhen this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is36 EN For ExampleAbout Ntsc Playback 38 EN Access the Auto Channel Set screenTuner Set Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice 40 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations a 42 ENSet Stations B TV Station And ID List Station NameClock Set Access the Clock Set screen44 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 46 ENPower 48 EN RecordingOther Problems 50 EN PlaybackTimer warning display Tuner Set Auto Channel Set Auto Set UpConnecting To a Satellite Receiver Watching AnotherMemory backup time Approx min Signal systemMonochrome signal, 625 lines LP HR-J480EU only 480 min. with E-240 video cassette