JVC HR-J631T manual Activate VARIABLE-SPEED Search, Activate HIGH-SPEED Search, High-Speed Search

Page 15

SHUTTLE

6

q

PLAY

1 2 3

4

5

6

7 8 9

0

FF

REW

PUSH JOG

15

Variable-Speed Search/

Reverse Play

ACTIVATE VARIABLE-SPEED

SEARCH

1 During playback or still, turn the SHUTTLE ring to the right for forward variable-speed search, or to the left for reverse variable-speed search (refer to the illustration on page 14).

OR

During playback, press PUSH JOG ª or £.

●To increase the speed in the forward direction, press £.

●To decrease the speed in the forward direction, press ª.

●To play in reverse slow motion, and in reverse play mode, continue to press ª after selecting all the forward slow motion modes.

To resume normal playback, press PLAY.

High-Speed Search

ACTIVATE HIGH-SPEED

SEARCH

1 During playback or still, turn the SHUTTLE ring all the way to the right for forward high-speed search, or to the left for reverse high-speed search.

●For forward search with a visible picture, during playback or still turn the SHUTTLE ring all the way to the right and release it within 1 second.

●For reverse search with a visible picture, during playback or still turn the SHUTTLE ring all the way to the left and release it within 1 second.

OR

During playback or still press FF for forward high-speed search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

NOTE:

For short searches, during playback or still press and hold FF or REW for over 2 seconds. When released, normal playback resumes.

Image 15

Contents HR-J631T Do not place the VCR Dear CustomerContents Situate VCR Check ContentsConnect VCR to Power Source Basic ConnectionsClock Tuner Perform Auto Channel SET Return to Normal Screen Access Tuner SET ScreenAccess AFC Screen Store Desired ChannelAccess Main Menu Screen Code SetupAccess G-CODE SET-UP Screen Access Guide Channel SET ScreenInput Guide Channel Number Return to G-CODE SET UP Screen NumberReturn to Normal Start Playback Simple PlaybackLoad a Cassette Find Program Start PointSimple Recording Still Picture/Frame-By- Frame Playback Pause During PlaybackActivate FRAME-BY Frame Playback Playb a CK and Recording Feat UresHigh-Speed Search Activate VARIABLE-SPEED SearchActivate HIGH-SPEED Search Variable-Speed Search Reverse PlayTracking Tracking ModeAdjust Manual Engage ManualAccess Function SET Select The SoundtrackMix Superimpose Playback and Recording FeaturesStop Repeat Access Distant CodeSkip Over Unwanted Sections Start RepeatReturn to Counter Position Zero Activate Instant ReviewActivate Counter MemoryNext-Function Memory Tape Position IndicatorRelation to B Beginning or E End shows you where you are on Press REW, then press Timer within 2 secondsPicture System Preparation Select ModeBegins with the picture Level optimized RecordingPress and hold REC Quality of the tape Use, then recordingPlayback Before beginning, perform steps 1 and 2 onTape in use Select Channel for Viewing Engage TV ModeReset Counter to Zero RecordingTo Record Stereo Programs Access 2ND AudioStereo And SAP Second Audio Program To Record SAP ProgramsSET Recording Duration Instant Timer Recording ITREngage ITR Mode Timer RecordingCheck Input Data Code Timer ProgrammingAccess G-CODE Screen Enter G-CODE NumberCHECK/CORRECT Input Data Engage Timer ModePress just once to access the Auto Timer screen Press TIMER. The VCR turns off automaticallyInformation On-Screen Timer ProgrammingSelect Program SET ProgramTo 100 PM in SP mode, If you program the VCR to timerRecord a show on September On channel 40 from 1200 noonRE-ENGAGE Timer Disengage TimerAccess Program SET Screen Cancel a ProgramAccess Function SET Screen Auto SP/EP TimerPlace the arrow next to your choice on or OFF by press CH5 Auto Timer Access Auto TimerSET TV Brand Code SET Remote ControlTurn on the TV ModeMake Connections SET RECORDER’S Input ModeAccess AUX Input Screen Edit From a CamcorderStart Recorder Start PlayerPlayer Your VCR Edit To Or From AnotherLoad Cassettes Control Two JVC VCRsStart Dubbing SET Input ModeLocate Start Point Engage Audio DubbingRemote control won’t function Batteries are discharged Cassette gets stuck partwayMake sure the window side is up, Re-perform the G-Code setup Doesn’t work properly Timer againPlayback Questions and AnswersMaximum recording time EIA monochrome signalSpeci Fications 20C to 60C -4F to140FIndex Front ViewFront Display Panel Remote Control ProvidedHR-J631T