JVC HR-J631T manual Basic Connections, Check Contents, Situate VCR, Connect VCR to TV

Page 4

4INSTALLINGYOURNEWVCR

Basic Connections

Antenna or Cable

Coaxial Cable

Flat Feeder

ANTENNA-

IN (Antenna

AC Power

Matching Transformer

or Cable

 

input)

Cord

 

 

 

Back of VCR

RF

 

Video Cable

 

OUT

AC

(not supplied)

 

Outlet

 

 

Audio Cable (not supplied)

RF Cable (supplied)

75 ohm terminal

TV

 

CHECK CONTENTS

 

Make sure the package contains all of the accessories

1 listed in “SPECIFICATIONS” (pg. 43).

 

SITUATE VCR

2 Place the VCR on a stable, horizontal surface.

3

CONNECT VCR TO TV

The connection method you use depends on the type of

TV you have.

 

RF Connection

 

To Connect To A TV With NO AV Input Terminals . . .

 

a– Disconnect the TV antenna from the TV.

 

b– Connect the TV antenna cable to the ANT IN jack

 

on the rear of the VCR.

 

c– Connect the supplied RF cable between the RF

 

OUT jack on the rear of the VCR and the TV’s

 

antenna terminal.

AV Connection

To Connect To A TV With AV Input Terminals . . .

a– Connect the antenna, VCR and TV as shown in the illustration.

b– Connect an Audio/Video Cable between the AUDIO OUT and VIDEO OUT jacks on the rear of the VCR and the AV IN jacks on the TV.

CONNECT VCR TO

POWER SOURCE

4 Connect the power plug to an AC outlet.

NOTES:

Even if your TV has AV input terminals, you must connect it to the VCR using an RF cable in order to record one show while watching another (pg. 25).

For full identification of the VCR's rear panel, refer to the Index (REAR VIEW pg. 44).

Image 4
Contents HR-J631T Dear Customer Do not place the VCRContents Check Contents Connect VCR to Power SourceBasic Connections Situate VCRClock Tuner Perform Auto Channel SET Access Tuner SET Screen Access AFC ScreenStore Desired Channel Return to Normal ScreenCode Setup Access Main Menu ScreenAccess Guide Channel SET Screen Access G-CODE SET-UP ScreenInput Guide Channel Number Number Return to G-CODE SET UP ScreenReturn to Normal Simple Playback Load a CassetteFind Program Start Point Start PlaybackSimple Recording Pause During Playback Activate FRAME-BY Frame PlaybackPlayb a CK and Recording Feat Ures Still Picture/Frame-By- Frame PlaybackActivate VARIABLE-SPEED Search Activate HIGH-SPEED SearchVariable-Speed Search Reverse Play High-Speed SearchTracking Mode Adjust ManualEngage Manual TrackingSelect The Soundtrack Access Function SETMix Playback and Recording Features SuperimposeAccess Distant Code Skip Over Unwanted SectionsStart Repeat Stop RepeatActivate Instant Review Activate CounterMemory Return to Counter Position ZeroTape Position Indicator Relation to B Beginning or E End shows you where you are onPress REW, then press Timer within 2 seconds Next-Function MemorySelect Mode Picture System PreparationRecording Press and hold RECQuality of the tape Use, then recording Begins with the picture Level optimizedBefore beginning, perform steps 1 and 2 on PlaybackTape in use Engage TV Mode Reset Counter to ZeroRecording Select Channel for ViewingAccess 2ND Audio Stereo And SAP Second Audio ProgramTo Record SAP Programs To Record Stereo ProgramsInstant Timer Recording ITR Engage ITR ModeTimer Recording SET Recording DurationCode Timer Programming Access G-CODE ScreenEnter G-CODE Number Check Input DataEngage Timer Mode Press just once to access the Auto Timer screenPress TIMER. The VCR turns off automatically CHECK/CORRECT Input DataOn-Screen Timer Programming Select ProgramSET Program InformationIf you program the VCR to timer Record a show on SeptemberOn channel 40 from 1200 noon To 100 PM in SP mode,Disengage Timer Access Program SET ScreenCancel a Program RE-ENGAGE TimerAuto SP/EP Timer Access Function SET ScreenPlace the arrow next to your choice on or OFF by press CH5 Access Auto Timer Auto TimerSET Remote Control Turn on the TVMode SET TV Brand CodeSET RECORDER’S Input Mode Access AUX Input ScreenEdit From a Camcorder Make ConnectionsStart Player Start RecorderEdit To Or From Another Load CassettesControl Two JVC VCRs Player Your VCRSET Input Mode Locate Start PointEngage Audio Dubbing Start DubbingCassette gets stuck partway Remote control won’t function Batteries are dischargedMake sure the window side is up, Timer again Re-perform the G-Code setup Doesn’t work properlyQuestions and Answers PlaybackEIA monochrome signal Speci Fications20C to 60C -4F to140F Maximum recording timeFront View IndexRemote Control Provided Front Display PanelHR-J631T