JVC HR-J631T manual Simple Recording

Page 13

Simple Recording

	PAUSE
	6
	q
	REC
CH	STOP/EJECT	PLAY

	P/EP
			ENTER
	1	2	3
NUMBER	4	5	6
NUMBER
	7	8	9
		0

CH

LAY

PAUSE

REC

STOP

13

	1		LOAD A CASSETTE
			Make sure the record safety tab is intact. If not, cover the
			hole with adhesive tape before inserting the cassette.
			SELECT RECORDING
	2		CHANNEL
			Press CH5°. Or press the appropriate NUMBER keys,
			then press ENTER. (The channel changes after a few
			seconds whether you press ENTER or not.)
	3		SET TAPE SPEED
	3		Press SP/EP to set the recording speed.
	4		START RECORDING
			Press and hold REC and press PLAY on the remote
			control, or press REC on the VCR's front panel.

			B.E.S.T. takes place at the beginning of both the first
			SP and the first EP recording after inserting the
			cassette (☞ pg. 23).


			PAUSE/RESUME
	5		RECORDING
	5		Press PAUSE. Press PLAY to resume recording.
	6		STOP RECORDING
			Press STOP or STOP/EJECT. Then press STOP/EJECT to
			remove the cassette.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its record safety tab.

To record on it later, cover the hole with adhesive tape.

Record safety tab

Image 13

Contents HR-J631T Do not place the VCR Dear CustomerContents Connect VCR to Power Source Check ContentsBasic Connections Situate VCRClock Tuner Perform Auto Channel SET Access AFC Screen Access Tuner SET ScreenStore Desired Channel Return to Normal ScreenAccess Main Menu Screen Code SetupAccess Guide Channel SET Screen Access G-CODE SET-UP ScreenInput Guide Channel Number Number Return to G-CODE SET UP ScreenReturn to Normal Load a Cassette Simple PlaybackFind Program Start Point Start PlaybackSimple Recording Activate FRAME-BY Frame Playback Pause During PlaybackPlayb a CK and Recording Feat Ures Still Picture/Frame-By- Frame PlaybackActivate HIGH-SPEED Search Activate VARIABLE-SPEED SearchVariable-Speed Search Reverse Play High-Speed SearchAdjust Manual Tracking ModeEngage Manual TrackingSelect The Soundtrack Access Function SETMix Superimpose Playback and Recording FeaturesSkip Over Unwanted Sections Access Distant CodeStart Repeat Stop RepeatActivate Counter Activate Instant ReviewMemory Return to Counter Position ZeroRelation to B Beginning or E End shows you where you are on Tape Position IndicatorPress REW, then press Timer within 2 seconds Next-Function MemoryPicture System Preparation Select ModePress and hold REC RecordingQuality of the tape Use, then recording Begins with the picture Level optimizedBefore beginning, perform steps 1 and 2 on PlaybackTape in use Reset Counter to Zero Engage TV ModeRecording Select Channel for ViewingStereo And SAP Second Audio Program Access 2ND AudioTo Record SAP Programs To Record Stereo ProgramsEngage ITR Mode Instant Timer Recording ITRTimer Recording SET Recording DurationAccess G-CODE Screen Code Timer ProgrammingEnter G-CODE Number Check Input DataPress just once to access the Auto Timer screen Engage Timer ModePress TIMER. The VCR turns off automatically CHECK/CORRECT Input DataSelect Program On-Screen Timer ProgrammingSET Program InformationRecord a show on September If you program the VCR to timerOn channel 40 from 1200 noon To 100 PM in SP mode,Access Program SET Screen Disengage TimerCancel a Program RE-ENGAGE TimerAuto SP/EP Timer Access Function SET ScreenPlace the arrow next to your choice on or OFF by press CH5 Auto Timer Access Auto TimerTurn on the TV SET Remote ControlMode SET TV Brand CodeAccess AUX Input Screen SET RECORDER’S Input ModeEdit From a Camcorder Make ConnectionsStart Recorder Start PlayerLoad Cassettes Edit To Or From AnotherControl Two JVC VCRs Player Your VCRLocate Start Point SET Input ModeEngage Audio Dubbing Start DubbingCassette gets stuck partway Remote control won’t function Batteries are dischargedMake sure the window side is up, Re-perform the G-Code setup Doesn’t work properly Timer againPlayback Questions and AnswersSpeci Fications EIA monochrome signal20C to 60C -4F to140F Maximum recording timeIndex Front ViewFront Display Panel Remote Control ProvidedHR-J631T