JVC HR-J631T Activate Instant Review, Activate Counter, Memory, Return to Counter Position Zero

Page 20

20

PLAYBACKANDRECORDINGFEATURES(cont.)

Instant ReView

.MEMORY	.RESET
C	C
	DISPLAY
REVIEW

	1	2	3
.	4	5	6
RESET	7	8	9
	7	8	9
		0

C.MEMORY

6

q

STOP

At the press of a button, you can power up your VCR, rewind the tape and begin viewing the most recent timer-recorded program.

ACTIVATE INSTANT REVIEW

1 After ensuring that the VCR is off and the Timer mode is disengaged, press REVIEW.

●The power comes on and the VCR searches for the index code indicating the start of the last timer-recorded program, then begins playback automatically.

●You can access a program 2–9 index codes away from the current position on the tape. If, for example, you have 5 programs recorded and you want to watch the third one, press REVIEW three times.

●To find the very beginning of the desired program, press REW or FF and search visually for the program’s start point.

Counter Reset

1		RESET COUNTER TO ZERO
		Press C.RESET.
		NOTE:
		By pressing the DISPLAY button, you can change the
		display to show the counter reading, channel number
		or clock time. (Channel number is not displayed during
		playback.)

FF

REW

STOP

Counter Memory

When activated, this feature returns the tape to counter position “zero”.

	ACTIVATE COUNTER
1	MEMORY
	Press C.RESET during playback at a point you want to have
	quick access to later. The counter reads “0H 00M 00S”.
	Then press C.MEMORY. The Counter Memory indicator
	in the front display panel lights.

RETURN TO COUNTER

POSITION ZERO

2 Press STOP (during playback), then press REW. The tape rewinds and stops at approximately “0H 00M 00S” automatically.

● To cancel Counter Memory, press C.MEMORY.

Image 20

Contents HR-J631T Dear Customer Do not place the VCRContents Check Contents Connect VCR to Power SourceBasic Connections Situate VCRClock Tuner Perform Auto Channel SET Access Tuner SET Screen Access AFC ScreenStore Desired Channel Return to Normal ScreenCode Setup Access Main Menu ScreenInput Guide Channel Number Access G-CODE SET-UP ScreenAccess Guide Channel SET Screen Return to Normal Return to G-CODE SET UP ScreenNumber Simple Playback Load a CassetteFind Program Start Point Start PlaybackSimple Recording Pause During Playback Activate FRAME-BY Frame PlaybackPlayb a CK and Recording Feat Ures Still Picture/Frame-By- Frame PlaybackActivate VARIABLE-SPEED Search Activate HIGH-SPEED SearchVariable-Speed Search Reverse Play High-Speed SearchTracking Mode Adjust ManualEngage Manual TrackingMix Access Function SETSelect The Soundtrack Playback and Recording Features SuperimposeAccess Distant Code Skip Over Unwanted SectionsStart Repeat Stop RepeatActivate Instant Review Activate CounterMemory Return to Counter Position ZeroTape Position Indicator Relation to B Beginning or E End shows you where you are onPress REW, then press Timer within 2 seconds Next-Function MemorySelect Mode Picture System PreparationRecording Press and hold RECQuality of the tape Use, then recording Begins with the picture Level optimizedTape in use PlaybackBefore beginning, perform steps 1 and 2 on Engage TV Mode Reset Counter to ZeroRecording Select Channel for ViewingAccess 2ND Audio Stereo And SAP Second Audio ProgramTo Record SAP Programs To Record Stereo ProgramsInstant Timer Recording ITR Engage ITR ModeTimer Recording SET Recording DurationCode Timer Programming Access G-CODE ScreenEnter G-CODE Number Check Input DataEngage Timer Mode Press just once to access the Auto Timer screenPress TIMER. The VCR turns off automatically CHECK/CORRECT Input DataOn-Screen Timer Programming Select ProgramSET Program InformationIf you program the VCR to timer Record a show on SeptemberOn channel 40 from 1200 noon To 100 PM in SP mode,Disengage Timer Access Program SET ScreenCancel a Program RE-ENGAGE TimerPlace the arrow next to your choice on or OFF by press CH5 Access Function SET ScreenAuto SP/EP Timer Access Auto Timer Auto TimerSET Remote Control Turn on the TVMode SET TV Brand CodeSET RECORDER’S Input Mode Access AUX Input ScreenEdit From a Camcorder Make ConnectionsStart Player Start RecorderEdit To Or From Another Load CassettesControl Two JVC VCRs Player Your VCRSET Input Mode Locate Start PointEngage Audio Dubbing Start DubbingMake sure the window side is up, Remote control won’t function Batteries are dischargedCassette gets stuck partway Timer again Re-perform the G-Code setup Doesn’t work properlyQuestions and Answers PlaybackEIA monochrome signal Speci Fications20C to 60C -4F to140F Maximum recording timeFront View IndexRemote Control Provided Front Display PanelHR-J631T