JVC HR-J631T Code Timer Programming, Access G-CODE Screen, Enter G-CODE Number, Check Input Data

Page 28

G-CODE

PRESS NUMBER KEY(0-9)

PRESS (MENU) TO MAIN MENU

28TIMERRECORDING(cont.)

G-Code Timer Programming

Before G-Code Timer programming, see "G-Code Setup" on page 9.

OK

6

q

1

2

3

LOAD A CASSETTE

Make sure the record safety tab is present.

●The VCR’s power comes on automatically.

●If you’re watching on channel 13, press TV/VIDEO to select the VIDEO mode. VIDEO is displayed on the front display panel.

ACCESS G-CODE SCREEN

Press MENU on the remote control.

●The clock must be set in order to access the G- Code screen. If you

haven’t set the clock, the Main Menu screen appears when you press

MENU. Refer to page 5 for the clock setting proce- dure.

ENTER G-CODE NUMBER

Press the appropriate NUMBER keys to enter the G-Code number printed in the TV listings for the TV program you wish to record.

SP/EP

TV/VIDEO
	1		2	3
NUMBER	4		5	6
NUMBER
	7		8	9
CANCEL		"8"	0
CANCEL
	NUMBER
	NUMBER
				OK

NUMBER "9"

MENU

TV/VCR

4

5

●To make corrections, press CANCEL and input the correct G-Code number.

●If the G-Code number you input is incorrect, "ERROR" may appear on the screen to advise you of the error. This happens when the G-Code number is for a program which has already passed. "ERROR" is displayed for about 4 seconds and the G-Code screen reappears (step 2).

CHECK INPUT DATA

	Press OK and the Program	PROGRAM 1
	screen appears.	PROGRAM 1
	screen appears.	(G-CODE 12345678)
	The G-Code number you	DATE	7/10 WED
	entered appears in the	START	8:00 PM
	entered appears in the	STOP	9:00 PM
	Program screen. Check to	CHANNEL	8 SP

	make sure it’s accurate.	PRESS (8=DAILY, 9=WEEKLY
		SP/EP=REC SPEED)
	● To timer-record daily or	SP/EP=REC SPEED)
	● To timer-record daily or	PRESS (MENU) TO END
	weekly serials, press

DAILY (NUMBER “8”) or WEEKLY (NUMBER “9”). “DAILY” or “WEEKLY” appears on the Program screen.

●If you made a mistake, press CANCEL and, after pressing MENU as many times as necessary to access the G-Code screen, input the correct G-Code number.

SET TAPE SPEED

Press SP/EP.

Image 28

Contents HR-J631T Dear Customer Do not place the VCRContents Check Contents Connect VCR to Power SourceBasic Connections Situate VCRClock Tuner Perform Auto Channel SET Access Tuner SET Screen Access AFC ScreenStore Desired Channel Return to Normal ScreenCode Setup Access Main Menu ScreenAccess Guide Channel SET Screen Access G-CODE SET-UP ScreenInput Guide Channel Number Number Return to G-CODE SET UP ScreenReturn to Normal Simple Playback Load a CassetteFind Program Start Point Start PlaybackSimple Recording Pause During Playback Activate FRAME-BY Frame PlaybackPlayb a CK and Recording Feat Ures Still Picture/Frame-By- Frame PlaybackActivate VARIABLE-SPEED Search Activate HIGH-SPEED SearchVariable-Speed Search Reverse Play High-Speed SearchTracking Mode Adjust ManualEngage Manual TrackingSelect The Soundtrack Access Function SETMix Playback and Recording Features SuperimposeAccess Distant Code Skip Over Unwanted SectionsStart Repeat Stop RepeatActivate Instant Review Activate CounterMemory Return to Counter Position ZeroTape Position Indicator Relation to B Beginning or E End shows you where you are onPress REW, then press Timer within 2 seconds Next-Function MemorySelect Mode Picture System PreparationRecording Press and hold RECQuality of the tape Use, then recording Begins with the picture Level optimizedBefore beginning, perform steps 1 and 2 on PlaybackTape in use Engage TV Mode Reset Counter to ZeroRecording Select Channel for ViewingAccess 2ND Audio Stereo And SAP Second Audio ProgramTo Record SAP Programs To Record Stereo ProgramsInstant Timer Recording ITR Engage ITR ModeTimer Recording SET Recording DurationCode Timer Programming Access G-CODE ScreenEnter G-CODE Number Check Input DataEngage Timer Mode Press just once to access the Auto Timer screenPress TIMER. The VCR turns off automatically CHECK/CORRECT Input DataOn-Screen Timer Programming Select ProgramSET Program InformationIf you program the VCR to timer Record a show on SeptemberOn channel 40 from 1200 noon To 100 PM in SP mode,Disengage Timer Access Program SET ScreenCancel a Program RE-ENGAGE TimerAuto SP/EP Timer Access Function SET ScreenPlace the arrow next to your choice on or OFF by press CH5 Access Auto Timer Auto TimerSET Remote Control Turn on the TVMode SET TV Brand CodeSET RECORDER’S Input Mode Access AUX Input ScreenEdit From a Camcorder Make ConnectionsStart Player Start RecorderEdit To Or From Another Load CassettesControl Two JVC VCRs Player Your VCRSET Input Mode Locate Start PointEngage Audio Dubbing Start DubbingCassette gets stuck partway Remote control won’t function Batteries are dischargedMake sure the window side is up, Timer again Re-perform the G-Code setup Doesn’t work properlyQuestions and Answers PlaybackEIA monochrome signal Speci Fications20C to 60C -4F to140F Maximum recording timeFront View IndexRemote Control Provided Front Display PanelHR-J631T