JVC HR-J631T manual Edit To Or From Another, Load Cassettes, Control Two JVC VCRs, Player Your VCR

Page 38

38

EDITING(cont.)

You can use your VCR as the player or the recorder.

Edit To Or

From Another

VCR

Player

Your VCR

VIDEO OUT AUDIO OUT

VIDEO IN

AUDIO IN

Recorder

Another VCR

POWER

1	2	3
4	5	6
7	8	9
NUMBER "0"	0
NUMBER "0"

MAKE CONNECTIONS

1 Connect an AV cable (not supplied) between the player’s VIDEO OUT and AUDIO OUT connectors and the recorder’s VIDEO IN and AUDIO IN connectors.

●When using your VCR as the recorder and a monaural VCR as the player, connect the player’s AUDIO OUT connector to the AUDIO IN L connector on the recorder.

LOAD CASSETTES

2 Insert the playback cassette into the player and the cassette to be recorded on into the recorder.

SET RECORDER’S INPUT MODE

3 Set to AUX. With this VCR, press NUMBER key “0” (AU appears on the front display panel in place of a channel number).

NOTE:

When using this VCR as the recorder, make sure to select "FRONT" or "REAR" (depending on which input connectors you use) at the Aux Input Screen. (To select the correct AUX input connector, follow steps 4 – 8 from the "Edit From A Camcorder" section, ☞ pg. 36.)

START PLAYER

4 Set to its play mode.

START RECORDER

5 Set to its record mode.

Control Two JVC VCRs

The supplied remote control is capable of controlling two JVC VCRs independently using the A/B CODE switch. You can set this VCR so it responds to remote commands only when the switch is set to B, and another VCR so it responds to commands when the switch is set to A. The switch is preset to A because this VCR normally responds to A-code signals. You can easily modify this VCR to accept B-code commands.

1Unplug the VCR’s power cord from the AC outlet.

2Set the A/B CODE switch on the remote control to B. 3Plug the VCR’s power cord back into the AC outlet.

4Turn the VCR’s power back on by pressing POWER on the remote.

The VCR will now respond only to B-code commands.

A/B CODE

Image 38

Contents HR-J631T Dear Customer Do not place the VCRContents Basic Connections Check ContentsConnect VCR to Power Source Situate VCRClock Tuner Perform Auto Channel SET Store Desired Channel Access Tuner SET ScreenAccess AFC Screen Return to Normal ScreenCode Setup Access Main Menu ScreenInput Guide Channel Number Access G-CODE SET-UP ScreenAccess Guide Channel SET Screen Return to Normal Return to G-CODE SET UP ScreenNumber Find Program Start Point Simple PlaybackLoad a Cassette Start PlaybackSimple Recording Playb a CK and Recording Feat Ures Pause During PlaybackActivate FRAME-BY Frame Playback Still Picture/Frame-By- Frame PlaybackVariable-Speed Search Reverse Play Activate VARIABLE-SPEED SearchActivate HIGH-SPEED Search High-Speed SearchEngage Manual Tracking ModeAdjust Manual TrackingMix Access Function SETSelect The Soundtrack Playback and Recording Features SuperimposeStart Repeat Access Distant CodeSkip Over Unwanted Sections Stop RepeatMemory Activate Instant ReviewActivate Counter Return to Counter Position ZeroPress REW, then press Timer within 2 seconds Tape Position IndicatorRelation to B Beginning or E End shows you where you are on Next-Function MemorySelect Mode Picture System PreparationQuality of the tape Use, then recording RecordingPress and hold REC Begins with the picture Level optimizedTape in use PlaybackBefore beginning, perform steps 1 and 2 on Recording Engage TV ModeReset Counter to Zero Select Channel for ViewingTo Record SAP Programs Access 2ND AudioStereo And SAP Second Audio Program To Record Stereo ProgramsTimer Recording Instant Timer Recording ITREngage ITR Mode SET Recording DurationEnter G-CODE Number Code Timer ProgrammingAccess G-CODE Screen Check Input DataPress TIMER. The VCR turns off automatically Engage Timer ModePress just once to access the Auto Timer screen CHECK/CORRECT Input DataSET Program On-Screen Timer ProgrammingSelect Program InformationOn channel 40 from 1200 noon If you program the VCR to timerRecord a show on September To 100 PM in SP mode,Cancel a Program Disengage TimerAccess Program SET Screen RE-ENGAGE TimerPlace the arrow next to your choice on or OFF by press CH5 Access Function SET ScreenAuto SP/EP Timer Access Auto Timer Auto TimerMode SET Remote ControlTurn on the TV SET TV Brand CodeEdit From a Camcorder SET RECORDER’S Input ModeAccess AUX Input Screen Make ConnectionsStart Player Start RecorderControl Two JVC VCRs Edit To Or From AnotherLoad Cassettes Player Your VCREngage Audio Dubbing SET Input ModeLocate Start Point Start DubbingMake sure the window side is up, Remote control won’t function Batteries are dischargedCassette gets stuck partway Timer again Re-perform the G-Code setup Doesn’t work properlyQuestions and Answers Playback20C to 60C -4F to140F EIA monochrome signalSpeci Fications Maximum recording timeFront View IndexRemote Control Provided Front Display PanelHR-J631T