RECORDING
EN19
Basic
Recording
Turn on the TV and select the VIDEO channel (or AV mode).
PLAY | JOG |
RECORD | PAUSE | STOP/EJECT |
|
NUMBER
PR +/–
LAY | SP/LP/EP |
|
TV signals being received by the recorder's
1 | LOAD A CASSETTE |
Insert a cassette with the record safety tab intact. | |
| |
● The recorder power comes on automatically. | |
● The recorder checks the tape information for | |
| Programme Navigation. For details, refer to “Naviga- |
| tion ” (☞ pg. 38). |
| ● Select the appropriate colour system (☞ pg. 52). |
|
|
| CHOOSE A PROGRAMME |
| Press PR +/– or the NUMBER keys. Or push the JOG |
| dial and turn it to the left or right to select the channel |
2 you wish to record. | |
| SET TAPE SPEED |
| Press SP/LP/EP ( ). Check the SP/LP/EP indicator on |
| the recorder display panel to confirm the selected tape |
3 speed. | |
4 | START RECORDING |
Press and hold RECORD and PLAY on the remote | |
control, or press RECORD on the recorder. | |
| |
B.E.S.T. takes place at the beginning of each first | |
| SP and first LP (or EP) recording after inserting the |
| cassette (☞ pg. 24). |
|
|
|
|
| PAUSE/RESUME |
| RECORDING |
5 Press PAUSE. Press PLAY to resume recording. | |
| STOP RECORDING |
RECORD
PAUSE
Press STOP on the remote control or STOP/EJECT on |
the recorder. Then press STOP/EJECT to remove the |
6 cassette. |
STOP
Accidental erasure prevention
●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.
Record safety tab
NOTE:
When recording in NTSC, if EP is selected, recording will always be done in the VHS mode even if an
Recording Resume
Function
If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.