JVC LPT0598-001A, HR-S5800AM, 0701MNV*ID*PJ SET Video Channel, Finish Video Channel SET, Set

Page 7

3

4

SET VIDEO CHANNEL

Set your TV to UHF channel 36.

●If the two vertical white bars appear clearly on the screen as shown in the illustration (☞ "TEST SIGNAL" on page 6), press OK and then go to step 4.

●If the two vertical white bars do not appear clearly, press OK and then PR +/– to set the video recorder to a vacant channel between 28 and 60 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50 and check if the two vertical white bars appear clearly on the screen; if so, go to step 4. If not, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 28 and 60, consult your JVC dealer.

FINISH VIDEO CHANNEL SET

Press OK.

●If Auto Set Up (☞ pg. 8) or Tuner Set (☞ pg. 54) has not previously been performed, the Language Select screen appears and Auto Set Up function takes place automatically.

EN7

With AV Connection or

S-VIDEO Connection

IMPORTANT:

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

ACCESS VIDEO CHANNEL SET MODE

 

 

Hold down STOP/EJECT on the recorder until the

1 display panel shows the following.

 

 

 

 

 

 

 

 

 

 

 

 

SET VIDEO CHANNEL

 

 

Press OK, then press PR – until the display panel shows

2

the following.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Now the video channel is set to off (– –).

 

 

 

 

 

 

 

FINISH VIDEO CHANNEL

3

 

SET

 

Press OK.

 

 

 

 

 

● If Auto Set Up (☞ pg. 8) or Tuner Set (☞ pg. 54)

 

has not previously been performed, the Language

 

 

Select screen appears and Auto Set Up function

 

 

takes place automatically.

To view picture signals from the video recorder, set your TV to its AV mode.

Be sure to connect the power plug to an AC outlet first before installing the lithium battery; otherwise, the battery's service life will be drastically shortened.

(MONO)

Installing/Removing the lithium battery

1Make sure that the power plug is connected to an AC outlet and turn off the recorder power.

2Open the battery cover while pressing the release tab as illustrated.

3Insert a lithium battery with the plus (+) side up and push it in.

●To remove the lithium battery, press the latch A down- ward using a pointed non-metallic object, then pull out the lithium battery.

4Close the battery cover until it clicks in place.

A

Page 6 Page 8
Image 7
Page 6 Page 8
Contents HR-S5800AM HR-S5880AM Safety Precautions An environment where strong magnetic fields are generated An environment prone to extreme temperatures or humidityConnect Recorder to Mains Check ContentsBasic Connections Situate RecorderBack of Recorder Video ConnectionConnect Recorder to TV Back of TVWith RF Connection Access Video Channel SET ModeVideo Channel Set EN I Nitial Sett IngsSET SET Video ChannelFinish Video Channel SET Finish Video ChannelSET Date Auto Set UpSelect Language SET TimeMajor Countries TV System During Auto Set UpSelect TV System Start Auto Channel SETTurn on the Recorder Access Main Menu ScreenENABLE/DISABLE On-Screen DisplaysSelect Language Access Initial SET ScreenOK or Push JOG # Place the pointer next to Access Clock SET ScreenClock Set Start Clock OperationStart Playback Basic PlaybackLoad a Cassette PointActivate FRAME-BY Frame Playback Playback FeaturesActivate HIGH-SPEED SearchIndex Search Activate Index SearchSlow Motion Variable-Speed SearchManually Adjust TrackingOverride Automatic TrackingPlayback Access Main Menu ScreenSET Mode Activate RepeatSections Skip Over UnwantedActivate Instant Review Basic Recording SET Counter Display Recording FeaturesReset Counter Select Channel to WatchSET Recording Duration Engage ITR ModeDisplay Remaining Time VHS Super VHS, S-VHS ET and VHS Select S-VHS ModeOr Push JOG #to select Super VHS ETPreparation S.T. Picture SystemDuring B.E.S.T RecordingPlayback Or press Record on the recorderEnter Guide Prog Number System SetupAccess G-CODE Showview Setup Screen EN Timer RecordingOr Push JOG% Enter Receiving Channel Position NumberReturn to Normal Screen Press Push JOG %Þ orAccess G-CODE Programme Screen Timer ProgrammingEnter G-CODE Number Engage Recorders Timer Mode Access Title Edit ScreenReturn to Normal Enter Programme Date Express Timer ProgrammingAccess G-CODE Screen Enter Programme Stop TimePress SP/LP/EP SET Programme Stop 24H Express Timer ProgrammingAccess 24HR Express Timer Programme Display SET Programme Start TimePress 24H Express ä SET Channel PositionAccess Programme Screen Access ProgrammeOverlapping Cancel or ChangeProgramme Setting ConfirmAuto SP→LP Timer Auto Timer Timer RecordingAuto SP→LP Timer Automatic Sat- ellite Program Recording IndicatorBefore performing the following steps Navigation Screen NavigationLoad a Recorded CassettePROG. Navigation Navigation ModeTurn Off Navigation Programme Navigation ScreenEdit Programme Title Programme NavigationDelete Tape Data Entering CharacterNumber KEY Character Remote Control Functions SET TV Brand Code TV Multi-brand Remote ControlControl Your TV Using Additional Buttons Turn on TVSET Brand Code Special FeaturesMulti-brand Remote Control Turn on UnitDVD Brand Name Code Cable Box or Satellite Re- ceiver Multi-brand CodeDVD Multi-brand Code Cable BOX Brand Name CodeAudio Cable not provided Speaker Mains outlet Connecting Using a Stereo SystemMake Connections EN System ConnectionsAdvantages Of S-VHS Video Recorders Access Main Nenu ScreenPreparation For Editing Editin GEditing Edit From CamcorderPlayer Start Recording Deck SET Recording Decks Input ModeEdit To Or From Another Video Recorder Start Source PlayerAudio OUT SET Input ModeAudio Dubbing Engage Audio DubbingEND Audio Dubbing Start DubbingNtsc Recording Playback PAL/MESECAM Recording and PlaybackOff-Air Recording Dubbed tape Tape-To-Tape EditingRecorded tape Playback equipmentMode Access Main MenuAccess Tuner SET Select Auto CH SETManual Channel Set Access Channel ListSelect Position SET Desired StationSwap Channel Positions Access Channel ListEN Tuner SET Delete a ChannelFINE-TUNE Fine-Tuning ChannelsIf youre using the RF OUT connec- tion EN TroubleshootingPress Play to turn the indicator off Check the cassette Recording New one. pg RoubleshootingNo, it is normal Quest Ions and AnswersFront View EN IndexRear View Remote Control Speci Fications EN EMO Memo HR-S5800/S5880AM
Top Page Image Contents