JVC 0701MNV*ID*PJ, HR-S5800AM Turn on Unit, SET Brand Code, Operate Unit, Special Features

44EN

SPECIALFEATURES(cont.)

V CABLE/SAT/DVD

VCR

NUMBER

LAY

FF

REW

PAUSE

STOP

OK

TV PR+/–

@#+/–

ATTENTION

The remote control can operate not only the video recorder but also some of your TV, cable box, satellite receiver and DVD.

●To operate your video recorder, first press the VCR button to set the remote control to the Video mode.

●To operate your TV, first press the TV button to set the remote control to the TV mode.

●To operate your satellite receiver, cable box or DVD, first press the CABLE/SAT/DVD to set the remote control to the satellite receiver, cable box or DVD mode.

Multi-brand Remote Control

For satellite receiver, cable box and DVD

Your remote control can operate the basic functions of your satellite receiver, cable box or DVD.

1		TURN ON UNIT
		Turn on the cable box, satellite receiver or DVD using
		the Power button on the unit or its remote control.
2		SET BRAND CODE
		1 Press and hold CABLE/SAT/DVD.
	2			code.Press the NUMBER keys to enter your unit’s brand
		3 Press OK, and release CABLE/SAT/DVD. Check if
				the unit's power goes off as it should. If it does, try
				other operations (☞ step 2).
		● Once you have set the remote control to operate the
			unit, you don't have to repeat this step until you
			replace your remote control's batteries.
		● Some brands have more than one code. If the unit
			does not function with one code, try entering another.
3		OPERATE UNIT
		First, press CABLE/SAT/DVD to set the remote control
		to cable box, satellite receiver or DVD mode, then
		press one of the following buttons:
		For satellite receiver and cable box . . .
				, TV PR +/–,NUMBER keys.
		For DVD. . .
				, PLAY, STOP, PAUSE, FF, REW, @# (4¢)
		keys.
		● For some brands, you must press OK after having
			pressed the NUMBER keys to enter a channel
			number.
		● To change the unit’s channels, press TVÊ PR+/–or the
			NUMBER keys. (The PR+/– button can be used to
			change the recorder’s channels only.)

IMPORTANT

Although the provided remote control unit is compatible with JVC satelite receiver and DVD, as well as many other models, it may not work with your unit, or in some instances, may have limited function capability.

NOTES:

●It's not possible to set the two units at the same time. You can only set the remote control to operate one of these units at a time.

●You have to subscribe to a satellite or cable service to receive satellite or cable channels.