JVC 0701MNV*ID*PJ Tape-To-Tape Editing, Recorded tape, Playback equipment, Dubbed tape

Page 53

EN53

Playback

This recorder can play back all 3 types of recorded tape.

Recorded tape

HR-S5800AM/HR-S5880AM

PAL

MESECAM

NTSC

Playback circuit

PAL

MESECAM

NTSC[PAL

NTSC 3.58 MHz

Built-in

RFconverter

K, I, G, H, M*

 

Multi-system receiver

 

PAL

 

(B/G, D/K, I, H)

RF OUT

NTSC (M)

 

 

Multi-system monitor

Manual switching

Manual switching

NTSC 4.43 MHz

VIDEO OUT AUDIO OUT

PAL

SECAM

NTSC 3.58

NTSC 4.43

NOTES:

* HR-S5800AM only

When viewing NTSC tapes on a PAL TV set:

The picture may shrink vertically with black bars appearing at the top and bottom of the screen. This is not a malfunction on the part of the video recorder nor the TV.

The picture may roll up or down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

ATTENTION:

When this recorder is connected to a multi-system TV, the audio signal may not be heard or may be noisy if the colour system select switch of the TV is adjusted to the AUTO position. In such a case, set the TV's colour system select switch to the appropri- ate position which corresponds to the TV system you have selected at the TV System Select screen.

Tape-To-Tape Editing

There are 4 different types of recorded tape, depending on the signal recorded.

Recorded tape

PAL

MESECAM

SECAM

NTSC

Playback equipment

PAL

MESECAM

SECAM

NTSC 3.58 MHz

NTSC 4.43 MHz

HR-S5800AM/HR-S5880AM

PAL

MESECAM

Recording circuit

NTSC 3.58 MHz

NTSC 4.43 MHz

Dubbed tape

PAL

MESECAM

NTSC

Image 53
Contents HR-S5800AM HR-S5880AM Safety Precautions An environment where strong magnetic fields are generated An environment prone to extreme temperatures or humidityBasic Connections Check ContentsSituate Recorder Connect Recorder to MainsConnect Recorder to TV Video ConnectionBack of TV Back of RecorderVideo Channel Set Access Video Channel SET ModeEN I Nitial Sett Ings With RF ConnectionFinish Video Channel SET SET Video ChannelFinish Video Channel SETSelect Language Auto Set UpSET Time SET DateSelect TV System During Auto Set UpStart Auto Channel SET Major Countries TV SystemENABLE/DISABLE Access Main Menu ScreenOn-Screen Displays Turn on the RecorderOK or Push JOG # Access Initial SET ScreenSelect Language Clock Set Access Clock SET ScreenStart Clock Operation Place the pointer next toLoad a Cassette Basic PlaybackPoint Start PlaybackActivate HIGH-SPEED Playback FeaturesSearch Activate FRAME-BY Frame PlaybackSlow Motion Activate Index SearchVariable-Speed Search Index SearchOverride Automatic Adjust TrackingTracking ManuallySET Mode Access Main Menu ScreenActivate Repeat PlaybackActivate Instant Review Skip Over UnwantedSections Basic Recording Reset Counter Recording FeaturesSelect Channel to Watch SET Counter DisplayDisplay Remaining Time Engage ITR ModeSET Recording Duration VHS Super VHS, S-VHS ET and VHS Select S-VHS ModeOr Push JOG #to select Super VHS ETPreparation S.T. Picture SystemPlayback RecordingOr press Record on the recorder During B.E.S.TAccess G-CODE Showview Setup Screen System SetupEN Timer Recording Enter Guide Prog NumberReturn to Normal Screen Enter Receiving Channel Position NumberPress Push JOG %Þ or Or Push JOG%Enter G-CODE Number Timer ProgrammingAccess G-CODE Programme Screen Return to Normal Access Title Edit ScreenEngage Recorders Timer Mode Access G-CODE Screen Express Timer ProgrammingEnter Programme Stop Time Enter Programme DatePress SP/LP/EP Access 24HR Express Timer Programme Display 24H Express Timer ProgrammingSET Programme Start Time SET Programme StopPress 24H Express ä SET Channel PositionAccess Programme Screen Access ProgrammeProgramme Setting Cancel or ChangeConfirm OverlappingAuto SP→LP Timer Timer RecordingAuto SP→LP Timer Auto Timer Before performing the following steps IndicatorAutomatic Sat- ellite Program Recording Load a Recorded NavigationCassette Navigation ScreenTurn Off Navigation Navigation ModeProgramme Navigation Screen PROG. NavigationEdit Programme Title Programme NavigationNumber KEY Character Entering CharacterDelete Tape Data Remote Control Functions Control Your TV Using Additional Buttons TV Multi-brand Remote ControlTurn on TV SET TV Brand CodeMulti-brand Remote Control Special FeaturesTurn on Unit SET Brand CodeDVD Multi-brand Code Cable Box or Satellite Re- ceiver Multi-brand CodeCable BOX Brand Name Code DVD Brand Name CodeMake Connections Connecting Using a Stereo SystemEN System Connections Audio Cable not provided Speaker Mains outletPreparation For Editing Access Main Nenu ScreenEditin G Advantages Of S-VHS Video RecordersPlayer Edit From CamcorderEditing Edit To Or From Another Video Recorder SET Recording Decks Input ModeStart Source Player Start Recording DeckAudio Dubbing SET Input ModeEngage Audio Dubbing Audio OUTEND Audio Dubbing Start DubbingOff-Air Recording PAL/MESECAM Recording and PlaybackNtsc Recording Playback Recorded tape Tape-To-Tape EditingPlayback equipment Dubbed tapeAccess Tuner SET Access Main MenuSelect Auto CH SET ModeSelect Position Access Channel ListSET Desired Station Manual Channel SetEN Tuner SET Access Channel ListDelete a Channel Swap Channel PositionsFINE-TUNE Fine-Tuning ChannelsPress Play to turn the indicator off Check the cassette EN TroubleshootingIf youre using the RF OUT connec- tion Recording New one. pg RoubleshootingNo, it is normal Quest Ions and AnswersFront View EN IndexRear View Remote Control Speci Fications EN EMO Memo HR-S5800/S5880AM