Major Countries | TV System | |
|
| |
Australia, New Zealand, Kuwait, U.A.E., |
| |
Indonesia, Singapore, Thailand, Malaysia, | B/G | |
Iran, Saudi Arabia, Egypt, Morocco, | ||
| ||
Lebanon, Iraq |
| |
|
| |
China, Mongolia, Russia | D/K | |
|
| |
Hong Kong | I | |
|
| |
U.S.A., Japan, S.Korea, Taiwan | M* | |
|
|
OK
PUSH JOG
5
6
EN
9
SELECT TV SYSTEM
Press PUSH JOG %Þ to place the pointer next to the appropriate TV system (refer to the table on the left).
START AUTO CHANNEL SET
Press OK or PUSH JOG #.
●The Auto Set Up function scans all the channels that are receivable by your recorder. It then automatically assigns each receivable channels to the PR +/– buttons. It skips
●As Auto Set Up progresses, the " 
" mark on the screen moves from left to right. (See below.)
DO NOT press any button on the recorder or remote control while Auto Set Up is in progress.
AUTO CH SET
PLEASE WAIT
STARTFINISH
During Auto Set Up
"PLEASE WAIT" blinks on the screen and "Auto" blinks on the front display panel.
TV Screen
When Auto Set Up is completed, the lowest position number will appear on the front display panel.
NOTES:
●If you perform Auto Set Up when the aerial cable is not connected properly, "SCAN COMPLETED
●If there is a power cut, or if you press 
or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again.
●If you want to set the tuner manually such as to add or skip channels, to swap channel positions, or to
●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels. ☞ "TV System Selection – When you see the picture but the audio can't be heard or sounds unnatural" on page 57.