JVC HR-S5800AM, LPT0598-001A, 0701MNV*ID*PJ specifications Edit From Camcorder, Editing, Player

48EN

EDITING(cont.)

Edit From

A Camcorder

NUMBER "0"

PR +/–

NOTES:

●All necessary cables can be obtained from your dealer.

●You can also use another video recorder as the player instead of a camcorder.

●When you select "EDIT" to dub tapes, be sure to select "AUTO" (or "NORM" when the B.E.S.T. function is set to "OFF") after you finish dubbing the tapes (☞ pg. 47).

IMPORTANT:

●To edit, both the player and the recorder must be of the same colour system. Select the appropriate colour system (☞ pg. 52).

●PAL, SECAM and NTSC camcorders can be used as a player for editing.

●For more information on multi-system compatibility, ☞ pg. 52.

You can use a camcorder as the source player and your video recorder as the recorder.

1	MAKE CONNECTIONS
	A If the camcorder has no S-VIDEO output connector...
	... connect the camcorder's AUDIO/VIDEO OUT
	connectors to the recorder's front panel AUDIO/
	VIDEO input connectors.
	B If the camcorder has an S-VIDEO output connector...
	... connect the camcorder's S-VIDEO OUT and
	AUDIO OUT connectors to the recorder's front
	panel S-VIDEO(S-2) and AUDIO input connectors.
	The recorder's rear panel S-VIDEO IN and AUDIO
	IN input connectors are also available.
	● When using a monaural camcorder, connect its
	AUDIO OUT connector to the AUDIO L input
	connector on your recorder.
	● When a Master Edit Control-equipped JVC camcorder
	is used, the camcorder is capable of controlling the
	recorder. Refer to the camcorder's instruction manual
	for operating procedure.

SET RECORDER'S INPUT MODE

2 Press NUMBER key "0" and/or PR +/– to select "F-1" for the AUDIO/VIDEO input connectors, or "S-2" for the AUDIO/S-VIDEO input connectors, depending on the connectors being used.

SELECT "EDIT" FOR PICTURE CONTROL SET MODE

3 Follow the "Picture Control" section on page 47, then select "EDIT."

START CAMCORDER

4 Engage its Play mode.

START RECORDER

5 Engage its Record mode.

AIf the camcorder has no S-VIDEO output connector...

Recorder

BIf the camcorder has an S-VIDEO output connector...

Recorder

		To rear panel PAUSE		To rear panel PAUSE
VIDEO	AUDIO	connector		connector
				AUDIO
input			S-VIDEO
	input			input
			(S-2)
Audio/Video Cable			input	Audio Cable (not provided)
(not provided)
		Mini-Plug Cable		S-Video Cable (provided)	Mini-Plug Cable
	VIDEO OUT	(not provided)			(not provided)
		(JVC camcorder		S-VIDEO OUT	(JVC camcorder
Player		only)	Player		only)
Camcorder	AUDIO OUT		Camcorder
				AUDIO OUT
	EDIT			EDIT