JVC 0701MNV*ID*PJ, HR-S5800AM Confirm, Overlapping, Programmes, To Modify, Cancel or Change

EN35

When programmes overlap each other

If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. The Programme Check screen appears and conflicting programmes will start blinking.

STOP+/–

PR +/–

START+/–

DATE+/ – SP/LP/EP

OK

PUSH JOG

	PR START		STOP	CH	DATE
PROGRAM OVERLAPPED	1	8:00	10:00	3	24.04
	2	10:00	10:45	2	25.04
	3	11:30	13:00	1	25.04
	4	9:00	10:00	92	DAILY
	5
	6
	7
	8
	[5/°] =			[PROG] : EXIT

Example: Programme 1 (you have just made) and Programme 4 overlap each other.

	CONFIRM THE
	OVERLAPPING
1	PROGRAMMES
	Overlapping programmes blink on the TV screen.
	SELECT THE PROGRAMME
2	TO MODIFY
	Press PUSH JOG %Þ, then press OK or PUSH JOG #.
	● You can only select one of the overlapping
	programmes.
	NOTE:
	If you do not mind this overlap, press PROG to finish
	the timer programme setting. The programme with the
	lower programme number will be recorded and the
	other one will not be recorded correctly. If no changes
	are made for approximately 1 minute, the recorder will
	return to the normal screen.
	CANCEL OR CHANGE
3	PROGRAMME SETTING
	To cancel a programme, press when the Programme
	screen you do not want is shown. “PROGRAM
	COMPLETED” appears on the TV screen for about 5
	seconds, then the normal screen appears.
	To change a programme, press the appropriate button:
	START+/–,STOP +/–,DATE+/–,PR+/– and/or SP/LP/EP
	( ) when the Programme screen on which you want
	to make changes is shown, then press OK. “PROGRAM
	COMPLETED” appears on the TV screen for about 5
	seconds, then the normal screen appears.
	NOTE:
	If the overlap is not yet solved, or another overlap
	occurs with the timer programme setting after making
	the last correction on a programme, the conflicting
	programmes will be shown on the Programme Check
	screen again. Repeat the above steps again until the
	overlap is solved.