JVC HR-S5800AM, LPT0598-001A, 0701MNV*ID*PJ specifications Remote Control Functions

42ENSPECIALFEATURES

Remote

Control

Functions

PLAY

VCR

NUMBER "1"

OK

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control's A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

	SET REMOTE CONTROL
	CODE FOR REMOTE
1	CONTROL
	1 Press and hold VCR.
	2 Press the NUMBER key “2”.
	3 Press OK, and release VCR.
	● The remote control now can transmit B code control
	signals.
	CHECK REMOTE CONTROL
2	CODE FOR RECORDER
	Press and hold PLAY on the recorder for more than
	5Ê seconds while the recorder is turned off. The code
	currently set appears on the display panel.
	CHANGE CODE FOR
3	RECORDER
	Press any key on the remote control. The recorder now
	responds to B code control signals.

To control two recorders with the same remote control

You can control two JVC recorders by switching the remote control code for the remote control between A and B (☞ step 1), keeping two recorders to different control codes.

●To change only the remote control code for the remote control, DO NOT perform steps 2 and 3.

NOTE:

To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2 of 1.