JVC HR-S5800AM, LPT0598-001A, 0701MNVIDPJ specifications Roubleshooting, New one. pg

Page 60

60EN

TROUBLESHOOTING(cont.)

	OTHER PROBLEMS

		SYMPTOM		POSSIBLE CAUSE		CORRECTIVE ACTION
	1.	Whistling or howling is heard from		● The camcorder's microphone is too		Position the camcorder so its
		the TV during camcorder record-		close to the TV.		microphone is away from the TV.
		ing.		● The TV's volume is too high.		Turn the TV's volume down.

	2.	When scanning channels, some of		● Those channels have been desig-		If you need the skipped channels,
		them are skipped over.		nated to be skipped.		restore them. (☞ pg. 55)

	3.	The channel cannot be changed.		● Recording is in progress.		Press PAUSE to pause the recording,
						change channels, then press PLAY to
						resume recording.

	4.	Channel settings that were made		● After the manual settings were		Perform manual setting again.
		manually seem to have changed or		made, Auto Channel Set was
		disappeared.		performed.

	5.	No channels are stored in the		● The TV aerial cable was not		Connect the TV aerial cable to the
		recorder's memory.		connected to the recorder when		recorder properly and turn off the
				Auto Set Up was performed.		recorder power once, then turn the
						recorder power back on again. The
						recorder will try Auto Set Up again.
						(☞ pg. 8)

	6.	"– –:– –" is displayed on the front		● The lithium battery is exhausted.		Replace the lithium battery with a
		display panel after a power outage.				new one. (☞ pg. 7)

Image 60

Contents HR-S5800AM HR-S5880AM Safety Precautions An environment prone to extreme temperatures or humidity An environment where strong magnetic fields are generatedCheck Contents Basic ConnectionsSituate Recorder Connect Recorder to MainsVideo Connection Connect Recorder to TVBack of TV Back of RecorderAccess Video Channel SET Mode Video Channel SetEN I Nitial Sett Ings With RF ConnectionSET Video Channel Finish Video Channel SETFinish Video Channel SETAuto Set Up Select LanguageSET Time SET DateDuring Auto Set Up Select TV SystemStart Auto Channel SET Major Countries TV SystemAccess Main Menu Screen ENABLE/DISABLEOn-Screen Displays Turn on the RecorderAccess Initial SET Screen Select LanguageOK or Push JOG # Access Clock SET Screen Clock SetStart Clock Operation Place the pointer next toBasic Playback Load a CassettePoint Start PlaybackPlayback Features Activate HIGH-SPEEDSearch Activate FRAME-BY Frame PlaybackActivate Index Search Slow MotionVariable-Speed Search Index SearchAdjust Tracking Override AutomaticTracking ManuallyAccess Main Menu Screen SET ModeActivate Repeat PlaybackSkip Over Unwanted SectionsActivate Instant Review Basic Recording Recording Features Reset CounterSelect Channel to Watch SET Counter DisplayEngage ITR Mode SET Recording DurationDisplay Remaining Time Select S-VHS Mode VHS Super VHS, S-VHS ET and VHSSuper VHS ET Or Push JOG #to selectS.T. Picture System PreparationRecording PlaybackOr press Record on the recorder During B.E.S.TSystem Setup Access G-CODE Showview Setup ScreenEN Timer Recording Enter Guide Prog NumberEnter Receiving Channel Position Number Return to Normal ScreenPress Push JOG %Þ or Or Push JOG%Timer Programming Access G-CODE Programme ScreenEnter G-CODE Number Access Title Edit Screen Engage Recorders Timer ModeReturn to Normal Express Timer Programming Access G-CODE ScreenEnter Programme Stop Time Enter Programme DatePress SP/LP/EP 24H Express Timer Programming Access 24HR Express Timer Programme DisplaySET Programme Start Time SET Programme StopSET Channel Position Press 24H Express äAccess Programme Access Programme ScreenCancel or Change Programme SettingConfirm OverlappingTimer Recording Auto SP→LP Timer Auto TimerAuto SP→LP Timer Indicator Automatic Sat- ellite Program RecordingBefore performing the following steps Navigation Load a RecordedCassette Navigation ScreenNavigation Mode Turn Off NavigationProgramme Navigation Screen PROG. NavigationProgramme Navigation Edit Programme TitleEntering Character Delete Tape DataNumber KEY Character Remote Control Functions TV Multi-brand Remote Control Control Your TV Using Additional ButtonsTurn on TV SET TV Brand CodeSpecial Features Multi-brand Remote ControlTurn on Unit SET Brand CodeCable Box or Satellite Re- ceiver Multi-brand Code DVD Multi-brand CodeCable BOX Brand Name Code DVD Brand Name CodeConnecting Using a Stereo System Make ConnectionsEN System Connections Audio Cable not provided Speaker Mains outletAccess Main Nenu Screen Preparation For EditingEditin G Advantages Of S-VHS Video RecordersEdit From Camcorder EditingPlayer SET Recording Decks Input Mode Edit To Or From Another Video RecorderStart Source Player Start Recording DeckSET Input Mode Audio DubbingEngage Audio Dubbing Audio OUTStart Dubbing END Audio DubbingPAL/MESECAM Recording and Playback Ntsc Recording PlaybackOff-Air Recording Tape-To-Tape Editing Recorded tapePlayback equipment Dubbed tapeAccess Main Menu Access Tuner SETSelect Auto CH SET ModeAccess Channel List Select PositionSET Desired Station Manual Channel SetAccess Channel List EN Tuner SETDelete a Channel Swap Channel PositionsFine-Tuning Channels FINE-TUNEEN Troubleshooting If youre using the RF OUT connec- tionPress Play to turn the indicator off Check the cassette Recording Roubleshooting New one. pgQuest Ions and Answers No, it is normalEN Index Front ViewRear View Remote Control Speci Fications EN EMO Memo HR-S5800/S5880AM