JVC 0701MNV*ID*PJ, HR-S5800AM Auto Set Up, Select Language, SET Time, SET Date, SET Year

8ENINITIALSETTINGS(cont.)

Auto Set Up

IMPORTANT

●Don't press any buttons on the recorder or remote that are not directly related to the step you are performing while Auto Set Up is in progress.

●If you perform Auto Set Up successfully during installa- tion, there's no need to separately perform the Language Select, Clock Set or Channel Set procedures, but if adjustments become necessary they can be performed as follows:

–To change the selected language ☞ pg. 11

–To reset or adjust the time ☞ pg. 12

–To add/delete channels manually ☞ pg. 55, 56

–To reset the tuner after moving to a different location ☞ pg. 54

The Auto Set Up function simplifies installation by guiding you through the procedures of setting the language, clock and tuner channels — simply follow the on-screen menus that appear.

Before starting, make sure of the following:

●The TV aerial cable should be connected to the recorder.

●The recorder's mains power cord should be connected to a mains outlet. ☞ pg. 4, 5

●The "Video Channel Set" procedure should be done first and the TV should be set to its AV mode (with AV or S- VIDEO connection ☞ pg. 7) or video channel (with RF connection ☞ pg. 6).

1		SELECT LANGUAGE
		Press PUSH JOG %Þ to place the pointer next to your
		desired language (English or Chinese), then press OK or
		PUSH JOG #.
		● The Clock Set screen appears.
2		SET TIME
		Press PUSH JOG %Þ to		CLOCK SET
		set the time, then press OK
		or PUSH JOG #.	TIME	DATE	YEAR
		● Press and hold either	0:00	01.01	01
		button to delay or
		advance the time by 30	[5/°] =
		minutes.	[MENU] : EXIT
3		SET DATE
	Press PUSH JOG %Þ to set the date, then press OK or
		PUSH JOG #.
		● Press and hold either button to change the date by 15
		days.
4		SET YEAR
		Press PUSH JOG %Þ to set the year, then press MENU.

OK

MENU

PUSH JOG