Yamaha RX-V1065 owner manual 17En, •Transmitting/receiving remote control signals

•Transmitting/receiving remote control signals

When the components have the capability of the transmission of the remote control signals, connect the REMOTE IN and REMOTE OUT jacks to the remote control input and output jack with the monaural analog mini cable as follows.

Remote

control out _	_	Remote
	_	control in

/1

Infrared signal	IR flasher	or Yamaha
receiver or Yamaha	component
component	(CD or DVD	player, etc.)

• If connecting a Yamaba component that supports the SCENE control

signal reception to tbe REMOTE OUT jack of this unit, you can start playback on the Yamaha component by using the SCENE Rmction (page 22).

•If connecting a component other than Yamaba products to the REMOTE OUT.jack of this unit, set "SCENE 1R" to "OFF" in the advanced setup menu (page 64).

"l'lfIfI:i"I _I'llI"

Connect a USB memory device or USB portable audio player to the USB port on the front panel of this unit. For information about USB storage devices supported by this unit, see page 45.

USB memory device or

USB portable audio player

This unit has the DOCK terminal, to which you can connect a Yamaha iPod universal dock (YDS-11, sold separately) or a Bluetooth wireless audio receiver (YBA- 10, sold separately). You can play an iPod or a Bluetooth component with this unit by connecting it to the DOCK terminal.

Use a dedicated cable for connection between the dock/ receiver and this unit.

Use the VIDEO AUK jacks on the front panel to connect a game console or a video camera to this unit. Be sure to turn down the volume of this unit and other components before making connections.

o..

Yamaha iPod universal dock or	Game console or video
	camera
Bluetooth wireless audio receiver

17En