Yamaha RX-V1065 owner manual 71En

Status	message				Cause
CHECK ANTENNA		The XM	:mtenua		is not conuected			to	tire
		XM Mini-Tuner Home Dock or the XM
		antenna cable has become damaged,
LOADING	XM	The XM	Mini-Tuner			is acquiring audio or
		program information from the XM
		satellite signal. This message can also
		occur in weak XM signal conditions. Note
		that this unit may not respond to some
		operations while			this	message	is
		displayed.
NO SIGNAL		The XM	Mini-Tuner			is not receiving			the
		XM satellite signal. Something may be
		blocking the XM antenna's view of the
		satellites or the antenna is not properly
		aimed.
CHANNEL	OFF AIR	The XM	channel		you	selected	is not
		currently	broadcasting.
CHANNEL	NOT	You may	be	attempting		to tune	to	an	XM
AUTHORIZED		channel	that	is blocked		or that	you	cannot
		receive with your XM subscription
		package.

Remedy

See

page

Check

that

the XM

antenna

is securely

counected

to

33

the XM Mini-Tuner Home Dock and check the

antenna cable tbr damage. Replace the XM antenna if

the

cable is damaged.

This

message

shoukt

disappear

in a few

seconds

in

36

good signal conditions. If you see this message often,

reposition the XM antenna to get better signal

reception. Use the "Antenna" information on the front

panel

display

or XM

intbrmation

on the

GUI

screen

to check the antenna reception level.

Check

for

antenna

obstructions

and reposition

the

36

XM antenna to get better signal reception. Use the

"Antenna"

int_rmation

on

the t_ont panel display or

XM information on the GUI screen to check the

antenna reception level. See instructions supplied

with the XM Mini-Tuner

and Dock for antenna

installation

int_rmation.

Check back at a later time; in the meantime, select another channel.

Consult the latest channel guide at

http://www.xmradio.com/for the current list of channels. For information on receiving this channel,

visit http://www.xmradio.com/or contact XM Satellite Radio at 1-800-967-2346.

CHANNEL NOT

AVAILABLE

UPGRADE XM TUNER

The selected channel is not available. The channel may have been reassigned to a different channel number. This message may occur initially with a new XM Mini-

Tuner or an XM Mini-Tuner that has not received XM's signal for an extended period.

This unit has detected a XM CNPI000 which is not compatible with this unit.

Consult the latest channel guide at

http://www.xmradio.com/for the current list of

channels. For cases of a new XM Mini-Tuner or an XM Mini-Tuner that has not received XM's signal for an extended period, allow the XM Mini-Tuner to receive the XM satellite signal for at least 5 minutes and then try to select the channel again.

If you have connected the XM Mini-Tuner (CNP2000) and see this message, set this unit to standby, disconnect and reconnect the XM Mini- Tuner Home Dock and re-install the Mini-Tuner in the Home Dock and turn on this unit.

If you continue to see this message with the XM Mini-Tuner, contact XM Satellite Radio at

http://xmradio.com/or 1-800-XMRAD]O (1-800- 967-2346).

If you have an incompatible XM CNP1000, contact

XM for int_rmation on upgrading to the XM Mini- Tuner.

....	No	artist name or song title is available t_r	No action required.
	this	selection.

71En