Yamaha RX-V1065 •Parameter for Straight Enhancer and 7ch Enhancer, Effect Level, Panorama

•Parameter for Straight Enhancer and 7ch

Enhancer

Effect Level

Choices: High*, Lo'a,

Adjusts the Compressed Music Enhancer effect level. When the high-frequency signals of the source is emphasized too much, set the effect level to "Low". To reduce the effect, set this parameter to "Low".

Decoder parameters

You can customize decoder effects by setting the following parameters. For details about the types of decoders, see "Surround decode mode" (page 27).

•Parameter for PLIIx Music and PLII Music

Panorama

Choices: Ott ::, On

Adjusts the soundscape of the front sound field. Sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect.

Dimension

Adjustable range: 3 to STD* to +3

Adjusts the difference in level between the front sound field and the surround sound field. You can adjust the difference in level created by the software being played back to obtain the preferred sound balance. The surround sound gets stronger as you make the value more negative and the front sound gets stronger as you make the value more positive.

Center Width

Adjustable range: 0 to 3* to 7

You can spread the center sound toward left and right according to your preference. Set this parameter to 0 for outputting the center sound from the center speaker only, or to 7 for outputting it from the front left/right speaker.

•Parameter for Neo:6 Music

Center Image

Adjustable range: 0.0 to 0.3* to 1.0

Adjusts the front left and right channel output relative to the center channel to make the center channel more or less dominant as necessary.

53En