Yamaha RX-V1065 Parameters for certain sound field programs, •Parameters for 7ch Stereo, Time

IW_';tlil,r,e.'t,li,:,pl,r,l,r_,.z,;,/':'_'_z.'_,pl,r,m_'t;e,;oz,lf [ff[.

•Parameters for adjusting reverberant sound

Reverb Time

Adjustable range: 1.0to 5.0s

Reverb Time parameter adjusts the attenuation time of the

rear reverberant sound based on the time that about lkHz

reverberant sound takes for 60dB of attenuation.

Reverberant sound attenuates faster as you decrease the

value. Reverb Time adjustment allows you to create a

natural reverberant sound, by setting the attenuation time longer for a sound source or room with less echo, or shorter for a sound source or room with more echo.

Rear

Rear reverberation Source sound reverberation

		Early	reflection.,
I					t
I	B
					60dB
					<
I_1	Time
		I			_ Time
ReverbTime		Reverb	Time
Short		iLong			i
reverberation
		reverberation		i
Soundsource
Small = 1.0s			Large	= 5.0s

Reverb Delay

Adjustable range: 0 to 250ms

Reverb Delay parameter adjusts the time difference

between the beginning of the direct sound and the

beginning of the reverberation sound. The larger the value,

the later the reverberation sound begins. Increasing the value of Reverb Delay allows you to create a reverberant sound in a wider area for the same Reverb Time.

Source sound

=,

(dB)

60dB

Time

Reverb Delay Reverb Time

Reverb Level

Adjustable range: 0 tol00r/_

Reverb Level parameter adjusts the reverberation sound

level. Increasing the value of Reverb Level makes the

reverbration sound level higher, which allows you to create more echo.

Sourcesound

.J

(dB)

Parameters for certain sound field

programs

•Parameter for MOVIE sound field programs

Decode Type

Choices: PLIIx Movie (PLII Movie), Neo:6 Cinema

Selects the decoder type for use with the MOVIE sound field programs.

•You cannot select a decoder for the following MOVIE sound field programs.

-Mono Movie

-Sports

-Action Game

-Roleplaying Game

•Parameter for 2ch Stereo

D i rect

Choices: Auto*, Off

Automatically bypasses the DSP circuit and tone control circuit when an analog sound source is selected as the input source. You can enjoy a higher quality sound.

Auto Outputs sound by bypassing the DSP circuit and tone control circuit when the "Bass" and "Treble" tone controls are both set to 0 dB.

Off Do not bypass the DSP circuit and tone control.

•Parameters for 7ch Stereo

Center Level / Surround L Level / Surround R Level / Surround Back Level / Presence L Level / Presence R Level

Adjustable range: 0 to 100_7_

Adjusts the volume of the center, surround L/R, surround back and presence L/R channels in the 7ch Stereo

program. The available parameters differ depending on the setting of the speakers.

52En