Yamaha RX-V1065 rr.:iiii:::, :iii ::..:,::::-..:...:::,,-_, components linked to scene selections

Registering input source/sound field

program

Select the desired input source/sound field program and then press and hold @SCENE (or ®SCENE) key to edit until "SET Complete" appears on the front panel display.

--'4'--

• lfyou change the input source setting, register the remote control code of

an external component to the input source (page 63).

components linked to scene selections

You can operate an external component with the remote control of this unit by setting a remote control code for the external component for each input source. Setting remote control codes for desired input sources allows you to

switch between external components linked to scene selections.

1Register the remote control code of an external component to the desired input source (page 63).

•This feature is not available forTUNER, SIRIUS and XM input

SOtlrces.

2While holding down the desired _SCENE

key, press and hold the _lnput selection key to which you registered a remote control code in step 1.

From now on the external component can be remotely controllable just by selecting a scene,

Press [_ON SCREEN on the remote control.

The GUI screen appears on the video monitor.

2Use _Cursor A / V repeatedly to switch the

page and _Cursor <1 / i> repeatedly to select the desired input source.

Category	Input source
Select Scene	BD/DVD, TV, CD, RADIO

	Category		Input	source
Select	Media	USB, DOCK,		SIRIUS, XM,
		TUNER, PHONO,			V-AUX,
		MULTI	CH
Select	Input	HDMII-4,	AVI-6,		AUDIOI/2

-4'--

•lfan input source you want to select is available in "Select Scene", you

can select the desired input source and sound field program at once.

3Press _]ENTER.

1Press N]MUTE on the remote control to mute the audio output.

The MUTE indicator on the front panel display flashes while audio output is muted.

2Press N]MUTE again to resume audio output.

You can adjust the balance of the high frequency range (Treble) and low frequency range (Bass) of sounds output from the front left and right speakers to obtain desired tone.

Press @TONE CONTROL on the front panel

repeatedly to select "Treble" or "Bass".

The current setting is displayed on the front panel

display.

'rr.:iiii:::, :iii ::..:,::::-..:...:::,,-_....::-::.

2 Rotate the @PROGRAM selector to adjust

the frequency range.

Control range: -10.0 dB to +10.0 dB

The display returns to the previous screen

automatically in few seconds,

•The tone control settings are not efli_ctive when this unit is in the Pure Direct mode or "MULTI CH" is selected as an input source.

•If you set the balance extremely off, sounds may not match those from other channels well.

Use	Pure Direct mode to enjoy the pure high fidelity	I
sound of the selected source. When Pure Direct mode is		I
activated, this unit plays back the selected source with the
least	circuitry.

23En