Yamaha RX-V1065 Press Cursor, A/ V to, Cursor A / g Selects a character to enter, Zone2

Changes input source names to be displayed on the front panel display.

Selecting a name to be displayed from templates

Press []Cursor		A/ V to		select the input source name to
edit	and then press	[Cursor		<3 / I::>to select a new
name from the following templates.
-	Blu-ray	-	Satellite
- DVD		- VCR
-	SetTopBox	-	Tape
-	Game	-	MD
-	TV	-	PC
-	DVR	-	iPod
- CD		- HD		DVD
-	CD-R	-	"blank"

Entering an original name

Press []Cursor A/ V to select the input source name to

edit and then press [ENTER. Enter up to 9 characters by selecting one character at a time with the following key operations.

[Cursor <3 / 1::> Selects a character to edit.

[]Cursor A / g Selects a character to enter.

[ENTEREnters a selected character.

The following characters are available for input.

A to Z, 0 to 9, a to z, symbols (#, *, -, +, etc.) and space

Zone2

Sets the maximum volume level and initial volume level of Zone2.

-4'--

•These parameters are available only when "Extra Speaker Assigmnent" is set to "Zone2" (page 56).

•Zone2 Max Volume

Adjustable range: 30.0dB to +15.0dB, +1 (,.5dB* (5.0 dB step)

Sets the maximum volume level of Zone2, so that the volume will not be accidentally increased. For example, you can adjust the volume between -80.0dB and -5.0 dB when you set this parameter to "-5.0dB".

•Zone2 Initial Volume

Adjustable range: Oft x:, Mute, 80.0dB to +16.5dB (0.5 dB step)

Use this feature to set the volume level of Zone2 when the

power of Zone2 unit is turned on. When this parameter is set to "OFF', the volume level used at the time when the

Zone2 unit was set to standby is applied.

•lfyou set "Zone2 Max Volume" and "Zone2 Initial Volume", the setting of"Zone2 Max Volume" becomes effective. For example, if you set "Zone2 Max Vnlume" to " 3I/.0dB" and "Zone2 Initial Volume" to

"0.0dB". the volume is automatically set to --30.0dB" at the next time the Zone2 unit is turned on.

You can set parameters for the sound field programs. For details, see page 50.

Choices: OftX%On

Protects the Setup menu settings against accidental alteration.

off		Not protect settings.
On		Protects		the Setup menu	settings	(except	for
		"Decode Type" in "DSP Parameter" and
		"Memory Guard").
• Whell	this	parameter	is	switched to "On", "_"	appears	at the top	left
corller	of	the Setup	menu	screen.

60En