Yamaha RX-V1065 owner manual Performs AutoSetup again, to select Retry or Exit and then press

If an error is detected during measurement, the measurement is canceled and "Error" appears on the GUI screen. Check the error and solve the problem. For details on each error message, see page 75.

Press _Cursor V once, press _Cursor <1 / t:>

to select "Retry" or "Exit" and then press

[]ENTER,

Retry

Performs "AutoSetup" again.

Exit

Terminates the measurement and "Auto Setup".

--'4'--

•When "E-5:NO1SY"appears, you can continue measurement. To

continue measurement, select "Prnceed". However, we recommend that you solve the problem first and then perlorm measurement again.

If a problem occurs during measurement, "Check xx warning(s)" appears on the GUI screen. Check the warning and solve the problem. For details on each warning message, see page 76.

•Optimization will not be performed while a warning message is

displayed. We recommend that you solve the problem and perform "Auto

Setup" again.

Press []Cursor V / A to select "Check xx

warning(s)" and then press []ENTER.

Details of the warning message are disphtyed. If there are multiple warning messages, you can display the

next message using [Cursor t:>.

2To return to the top result display, press [ENTER again.

21En