Bass Crossover Frequency
Choices: 40Hz, 60Hz, 80Hz*, 90Hz, 100Hz, 110Hz, 120Hz,
160Hz, 200Hz
Sets the lower limit of the
If your subwoofer has a volume control or a crossover frequency control, set the volume to half or the crossover frequency at the maximum.
Subwoofer Phase
Choices: Normal*,Reverse
Sets the phase of your subwoofer if bass sounds are lacking or unclear.
Normal | Select | this not to change the phase of your |
| subwoofer. | |
Reverse | Select | this to reverse the phase of your |
| subwoofer. |
•Speaker Level
Adjustable range: 10.0dB to +10.0dB (0.SdB step)
Defaults:0dB (FR.L, FR.R, SWFR, PR.L, PR.R)
1.0dB (CNTR, SUR.L, sUn.R, SBL, SBR)
Separately adjusts volume of each speaker so that the sounds form speakers are at the same volume at the listening position. Items to be displayed vary depending on the number of speakers connected.
•When only one surround back speaker is connected. "SB" appears instead of "SBL" and "SBR".
•You can adjust the volume listening to test tones when you set "Test Tnne" to "On" (on this page).
•If your subwonlbr has a w_lmne control or a crossover fl'equency control. set the w_lume to half or the crossover fl'equency at the maximum.
•Speaker Distance
Adjusts timing at which each speaker outputs sound so that sounds from speakers reach the listening position at the same time. Set unit (Unit) first and set the distance of each speaker.
Unit
Choices: feet (ft)*, meters On)
feet (ft) | Displays | the | speaker | distance | in | feet. |
meters (m) | Displays | the | speaker | distance | in | meters. |
FR.L / FR.R / CNTR / SUR.L / SUR.R / SBL / SBR / SWFR / PR.L / PR.R
Adjustable range: 0.30m to 24.00m (l.0ft to 80.0ft)
Defaults: 3.00md0.0ft) (FR.L,FR.R, SWFR,PR.L,
PR.R)
2.60m(8.Sft) (CNTR)
2.40m(8.0ft) (SUR.L, sUn.R, SBL, SBR)
•Available items diflbr depending on the "Speaker Cnnliguratinn" settings (page 55).
•Wben only one surround back speaker is connected. "SB" appears instead of "SBL" and "SBR".
•Equalizer
Adjusts sound quality and tone using a parametric graphic equalizer.
EQ Type Select
Choices: Auto PEQ, GEQ*, Off"
Selects an equalizer type.
Auto PEQ | Uses | a parametric | equalizer | selected | in | |||||
| "Auto Setup". Characteristics of the |
| ||||||||
| currently used parametric equalizer are | |||||||||
| displayed | below "Auto | PEQ". |
| ||||||
GEQ | Uses | a graphic | equalizer. | Press [j_]I_NTI_R | ||||||
| to adjust the characteristics of the graphic | |||||||||
| equalizer. |
|
|
|
|
|
|
|
| |
Off | Not | use a graphic | equalizer. |
|
| |||||
GEQ |
|
|
|
|
|
|
|
|
|
|
Channels |
| Front | Left, | Front | Right, | Center, Surround Left, | ||||
|
| Surround | Right, Surround | Back Left, | Surround | |||||
|
| Back | Right |
|
|
|
|
|
| |
Choices: |
| 63Hz, | 160Hz, | 400Hz, | lkHz, | 2.5kHz, | 6.3kHz, | |||
|
| 16kHz |
|
|
|
|
|
|
|
|
Adjustable | range: | 6.0dB to | 0dB* | to +6.0dB | (0.5dB step) |
Adjusts sound quality of each speaker using a graphic equalizer. The graphic equalizer of this unit can adjust signal levels in 7 frequency ranges.
To adjust the signal level within each range, press
_]Cursor <:1/ t:> to select the desired speaker while "Channel" is selected, press [j_]Cur$or/_ / V to select the desired frequency band and then press [j_]Cur$or <:1/ t:> to adjust the signal level.
•Test Tone Choices: Off*, On
Switches between on and off of an oscillator that generates test tones. When "On" is selected, you can adjust the settings of "Manual Setup" while listening to a test tone.
Off | Not generate test tones. |
On | Generates test tones. |
You can set various items for sound outputs.
•Dynamic Range Choices: Min/Auto,STD, Max*
Selects the dynamic range adjustment method for reproducing bitstream signals.
Min/Auto (Min) Sets the dynamic range suitable for low volume or a quiet environment, such as at night, for bitstream signals except for Dolby TrueHD signals.
(Auto) Adjusts the dynamic range for Dolby TrueHD signals based on input signal information.
STDSets the standard dynamic range recommended for regular home use.