Yamaha RX-V1065 owner manual back speakers, 68En

Problem

No sound is heard from the subwoofer.

No sound is heard from the surround

back speakers,

The audio input sources cannot be played in the desired digital audio signal

format.

Noise/hum noise is

heard,

The volume level cannot be increased, or the sound is distorted.

"Memory Guardt" is displayed and the setting cannot be changed.

There is noise interference from digital or radio frequency equipment.

Cause Remedy

"LFE / Bass Out" is set to "Front" and a Set "LFE / Bass Out" to "Sub'a, oofer" or "Both". Dolby Digital, DTS or AAC signals is

being played.

"LFE / Bass Out" is set to "Subwoofer" or Set "LFE / Bass Out" to "Both". "Front" and a 2-channel source is being

played.

The source does not contain low frequency signals.

"Extended Surround" in	the Option	menu	Set	"Extended	Surround"	other than	"OFF' or "Auto".
is set to "Oft", or an input signal does not
contain a surround back flag with
"Extended Surround" set to "Auto".
The connected component	is not set	to	Set	the playback	component	properly	referring to its
output the desired digital audio signals,			operating instructions.

Incorrect cable connection.	Connect	the	audio		cables	properly.		If the problem
	persists, the cables may be detective.
A DTS-CD is being played back.	1) When	only		noise is output
	If a DTS bitstream signal is not properly input to this
	unit, only	noise		is	output.	Connect	the playback
	component		to this		unit by digital		connection		and play
	back the DTS-CD. If the condition is not improved,
	the problem may results from the playback
	component.		Consult		the	manufacturer		of the	playback
	component.

2)When noise is output during playback or skip operation

Bet_re playing back the DTS-CD, display the Option

menu alter selecting the input source and set "Decoder Mode" to "DTS".

The component connected to the AUDIO Tnrn on the power of the component. 1/2 jacks of this unit is turned off.

"Memory Guard" in "Set Menu" is set to Set "Memory Guard" to "OFF'. "On".

This	unit is too	close to other digital or	Move this unit further away from such equipment.
radio	frequency	equipment.

See

page

5(,

56

48

15, 48

63

6O

68En