Aiwa VX-S137U, VX-S207U Setting the timer manually, To set the daily/weekly timer, Example

Page 28

Setting the timer manually

If you cannot use VCR Plus+® system, you can set the timer manually.

You can set up to 8 programs within one month of the current date.

TV VCR/CATV

T-REC

MENU

ENTER

SET/TRACKING CANCEL +/–

Before starting

• Check that the clock is set correctly.

• Insert a cassette with its erasure prevention tab in place.

5 Set the start time (hours and minutes), the end time (hours and minutes), the channel number and the tape speed in the same way as in step 4.

To change the minutes setting in ten minutes, press and hold SET/TRACKING + or –.

The timer program list appears.

6 If you want to set another program, repeat steps 3 through 5.

7 Press MENU twice to return to the normal screen. 8 Press T-REC.

The TIMER REC indicator on the unit lights, and the unit stands by for timer recording.

If the TIMER REC indicator does not light, a cassette is not inserted.

The cassette is ejected if the cassette’s erasure prevention tab has been removed.

You can turn the unit off. The unit automatically starts recording at the programmed time.

To set the daily/weekly timer

In step 4, press SET/TRACKING – repeatedly before pressing ENTER.

The setting changes as follows:

Example

The current day (Sunday)

 

SUN-SAT (Sunday to Saturday)

 

• Set the TV VCR/CATV selector to TV VCR.

• If the CATV converter is used for the timer recording,

check that the CATV converter is turned on and the

channel you want to record is selected.

1 Press MENU.

2 Press SET/TRACKING + or – to select TIMER REC SET, then press ENTER.

...

One month later minus two days

One month later minus one days

WKL-SUN (Every Sunday)

MON-SAT (Monday to Saturday)

MON-FRI (Monday to Friday)

WKL-SAT (Every Saturday)

WKL-FRI (Every Friday)

.....

3 Press SET/TRACKING + or – to select the line on which no program has been set, then press

ENTER.

4 Press SET/TRACKING + or – to set the date, then press ENTER.

If you want to set daily/weekly recordings, see “To set the daily/weekly timer.”

Press SET/TRACKING + to change the display in reverse order. After setting, press ENTER.

To cancel a program

Select TIMER REC SET in the menu. And press SET/

TRACKING + or – to select the unnecessary program, then press CANCEL.

Tips

If you want to record the program through the line input, press SET/TRACKING + or – to display “L1” (from the AUDIO/VIDEO IN jacks on the rear) or “L2” (from the AUDIO/VIDEO IN jacks on the front) in step 5 instead of the channel number.

To confirm the setting, select TIMER REC SET in the menu to display the timer program list. Press MENU twice to return to the normal screen.

When the power supply is interrupted for more than 5 seconds, the preset program is cleared. In this case, you have to set the clock and timer again.

Notes

During the timer recording, when the tape reaches the end, the TIMER REC indicator on the unit flashes.

During watching the other program on the unit, when the timer recording starts, the channel shown on the TV screen is changed as you set on timers.

Caution

When the TIMER REC indicator on the unit lights, the tape functions are not operable. To operate the others, press T- REC. However, remember to press it again to activate timer recordings.

27 ENGLISH

Image 28
Contents VX-S207U VX-S137U Installation Electric PowerMaintenance Damage Requiring ServiceOutdoor Antenna LightningWelcome To use the security hook for safety VX-S207 only Connecting the antennaBasic connections To connect the supplied telescopic antenna VX-S137 only Mount the supplied antenna in the antenna holderTo connect a Catv system using a Catv converter To connect a Catv system without using a Catv converterCatv connections Preparing the remote control Using the remote controlInserting the batteries Controlling the TVs and CATVsSetting the language Press Power to turn on the unit Press MenuBefore starting Set the TV VCR/CATV selector to TV VCRSetting the Auto Clock Setting the clockTo correct the digits while setting Setting the standard time according to your area Setting the time by the daylight saving timeNormally the Auto setting is sufficient Setting the channels Adding or erasing the channels manuallySample Channel Line Up Chart TV Station VCR Plus+ Checking the channel set-up to use VCR Plus+ systemFor example ShowtimeSetting the sleep timer Watching a TV programSelecting the closed captions mode Press Caption repeatedly to select the caption modeCaptions Full Screen TextPress SET/TRACKING + or to adjust the setting Adjusting the pictureIncreasing Decreasing Numbers Makes the bass Sound stronger Sound weaker Adjusting the soundMakes the treble Sound stronger Sound weaker Setting the On-Timer Press SET/TRACKING + or to select on TIMER, then press EnterTo correct the data while setting Setting the Off-TimerPress SET/TRACKING + or to display SET, then press Enter Playing back a tape To stop playbackInsert a cassette Press d Play to start playbackIf you cannot get a clear playback picture Additional functionsTo cancel repeat playback Various search functionsPlaying back a tape repeatedly Press MenuTo search the next index signal Searching with the index function Index SearchSearching the end of the recorded program End Search To stop End SearchRecording a TV program To stop recordingTo pause recording To prevent an accidental recordingWhen you set the timer for more than two timer programs Stop recording when recording without timerRecording with One-Touch Recording Press w REC/OTRSetting the timer with To extend the recording duration while recordingChanging the setting Setting the timer manually To set the daily/weekly timerPress SET/TRACKING + or to set the date, then press Enter ExampleConnecting with another VCR DubbingOperation Select the tape speedSetting the V-chip Setting the V-chipRegistering the password Press SET/TRACKING + or to display the desired settingChanging the password When TV-MA is selected, the items below appearTo use the TV after the TV is protected Appears instead of the number Chip SET menu appearsMultichannel TV Sound MTS and Hi-Fi audio sound system Recording the sound of the SAP BroadcastPlaying back a MTS-program recorded tape On-screen displayIdentifying the on-screen display items Troubleshooting Care and maintenanceSpecifications 14 toCatv 5A, A-1 to A-5, a to W +1 to W+84Front panel VX-S207 Parts and controlsFront panel VX-S137 Remote control Rear panelAvertissement AlimentationRemarque pour l’installateur du systè me Catv Antenne externeEn cas de panne FoudreSystè me VCR Plus+ et lecture monotouche Diffusion MTS son té lé visé multicanalPuce Sous-titresRaccordements de base Raccordement de l’antenneUtilisation du crochet de sé curité VX-S207 uniquement Placez l’antenne fournie dans le porte-antenne RemarqueRaccordements Catv Pour raccorder un systè me Catv avec un convertisseur CatvPréparation de la télécommande Commander un téléviseur et un convertisseur CatvUtilisation de la télécommande Introduction des pilesSélection de la langue d’affichage Appuyez deux fois sur Menu pour revenir à ’é cran normalAvant de commencer Réglez le sélecteur TV VCR/CATV sur TV VCRRéglage de l’horloge Réglage automatique de l’horlogePour corriger des chiffres en cours de ré glage Appuyez sur SET/TRACKING + ou pour ré gler les minutesRéglage de l’heure d’été Réglage de l’heure de votre zone géographiqueAppuyez sur Enter pour sé lectionner on Appuyez deux fois sur Menu pour revenir à l’é cran normalSélection des chaînes Ajout ou suppression manuel de chaînesAppuyez sur Enter pour sé lectionner TV ou Catv Appuyez deux fois sur Menu pour revenir à l’é cran normalPar exemple Exemple tableau de concordance des canaux Station deTé lé vision VCR Plus+ USA NetworkRegarder une émission de télévision Réglage du programmateur d’extinctionSélection du mode de sous- titres ’affichage change selon la séquence suivantePas d’affichage Texte CNL2 Texte CNL1 Sous-titres désactivé Sous-titresRend les couleurs Claires plus vertes Claires plus rouges Réglage de l’imageRend l’image plus Nette Douce Réglage du son Renforce les graves Atténue les gravesRenforce les aiguës Atténue les aiguës Droit GaucheRéglage du programmateur de mise sous tension Réglage du programmateur de mise hors tension ’indicateur ON-TIMER de l’appareil s’allumePour corriger les donné es en cours de ré glage Lecture d’une cassette Pour arrê ter la lectureIntroduisez une cassette Appuyez sur d Play pour dé marrer la lectureFonctions complémentaires Différentes fonctions de recherche Lecture répétée d’une cassettePour annuler la lecture ré pé té e Appuyez sur Call pour afficher le compteur de bandePour rechercher le signal d’index suivant Appuyez sur REC. END Search en mode d’arrê tRecherche avec la fonction ’indexation Recherche d’index Pour arrê ter la recherche rapideEnregistrement d’une émission télévisée Pour arrê ter l’enregistrementPour activer une pause d’enregistrement Pour é viter un enregistrement accidentelSi vous avez programmé plus de deux enregistrements Enregistrement avec la fonction monotoucheAppuyez sur w REC/OTR Si vous faites une erreur, appuyez sur Cancel Réglage du programmateur avec le système VCR Plus+Vous pouvez programmer jusqu’à 8 émissions Program dans ce menu correspond au bouton VCR PLUS+Changement des réglages Pour annuler un enregistrement programméSi des enregistrements programmé s se chevauchent Pour programmer un enregistrement journalierPour programmer un enregistrement journalier/hebdomadaire Pour annuler un programmeAvant de ré gler le programmateur ExempleCopie Raccordement d’un autre magnétoscopeFonctionnement Sélectionnez la vitesse de la bandeEnregistrement du mot de passe Réglage de la puceActivation de la puce Appuyez sur SET/TRACKING + ou pour sé lectionner V-CHIP Modification du mot de passeAppuyez sur Enter pour afficher on Son télévisé multicanal MTS et système de son Hi-Fi Enregistrement du son d’une émission SAPLecture d’une émission MTS enregistrée sur une cassette Affichage des indicateursIdentification des indicateurs affichés Dépannage Soin et entretienSpécifications Panneau frontal VX-S207 Composants et commandesPanneau frontal VX-S137 Télécommande Panneau arrière8A-JTD-901-31 000620DTN-YX