Preparing the remote control
Inserting the batteries
Caution
To prevent damage from leakage or explosion, follow the descriptions below.
•Insert two supplied R03 (size AAA) batteries with the 0 and 9 marks correctly as illustrated.
•Do not mix old batteries with new ones or different types of batteries.
•Do not throw the batteries into a fire, apply heat to them or take them apart.
•Do not carry the batteries with keys or other metallic objects.
Note
Remove the batteries when they have no more power, or when you do not use the remote control for a long period of time.
Using the remote control
Point the remote control toward the remote sensor.
| ||
Remote | 7m | |
sensor | ||
| ||
30˚ | 30˚ |
Notes
•The remote control may not operate when there is any obstruction between the remote control and the remote sensor.
•Strong ambient light sources such as a fluorescent lamp or direct sunlight may cause unreliable operation.
•Using a TV with the same type of infrared remote control facing the same direction may cause incorrect operation.
•The maximum distance for effective control between the remote control and the remote sensor is 7 meters.
•Although you can use the remote control within an angle of up to 30 degrees in any direction from directly in front of the remote sensor, we recommend a narrower angle for stable operation.
Controlling the TVs and CATVs
The remote control can control the CATV converters for the CATV. To control CATV converters, set the manufacturer’s code number shown in the table on the next page.
TV VCR/CATV
POWER
Number 
buttons 
PRESET
CHANNEL
N/M
1 Set the TV VCR/CATV selector to CATV.
TV
VCR CATV
2 While holding PRESET, press the number buttons to set the code number referring to the table on the next page.
Some manufacturers have more than one code number. If the remote control does not operate with the CATV after setting the code number, try another number.
The number buttons on the remote control are activated for the CATV converter.
When you operate except for changing the CATV channel, set the TV VCR/CATV selector to TV VCR.
Notes
•Due to the variety of codes used by manufacturers, AIWA cannot guarantee that the MBR remote control will operate with every model of the brands listed.
•The number buttons can be used only for channel selection, but they may not function correctly with some CATV converters.