American Dynamics ADV096HD Adjusting the Clock, When adjusting the clock to the exact second

Adjusting the Clock

You can adjust the VCR’s clock from the front panel, even though the VCR is turned off. This function lets you to set the information in the order of time, month, day and year. The hour time is entered twice. This is due to the daylight saving time.

Example : Setting the day and present time to 10:38 a.m., 11th December, 2002.

1. When the VCR and peripheral devices are turned off, press MENU button for more than 3 seconds.

• The hour digits of the clock on the fluorescent display starts flashing.

2. Turn JOG to set the hour digits.

When the flashing item is same as the current time, turn SHUTTLE without turning JOG.

3. Turn SHUTTLE to the right to make the

10-minute digit flash and turn JOG to adjust.

4. Turn SHUTTLE to the right to make the

1-minute digit flash and turn JOG to adjust.

To finish the clock adjustment now, press MENU button for more than 3 seconds.

5. Turn SHUTTLE to the right to make the month digits flash and turn JOG to adjust.

• The Month indicator () illuminates.

6.Turn SHUTTLE to the right to make the day digits flash and turn JOG to adjust.

• The Day indicator () illuminates.

7. Turn SHUTTLE to the right to make the year digits flash and turn JOG to adjust.

8.Turn SHUTTLE to the right.

• The VCR’s clock is set now.

9.Repeat steps 1 and 2 and turn SHUTTLE to the left to exit after hour mark is entered the second time.

Note

•Time and Date information can also be entered via the Menu System (FIRST TIME SETUP/TIME DATE ADJUST).

When adjusting the clock to the exact second

Set the clock as described above, but set 1-minute digit to one or two minutes ahead of the reference time being used. After the step 7 above, when reference time reaches 00 second of the minute you have chosen, turn SHUTTLE to the right. The VCR’s clock now corresponds to the reference time to the nearest second.

Info. Use of JOG dial and SHUTTLE ring for menu setting

JOG dial

SHUTTLE ring

JOG dial

•Use JOG by placing a finger in the indent and turning.

•Turning JOG to the right moves the selection forward. Turning it to the left moves the selection back.

•If the selection is not flashing, turn JOG to the right to move

the cursor () down one position then to the left to move back to your selection.

SHUTTLE ring

•If you turn SHUTTLE to the right/left end and release it, SHUTTLE comes back to the center position automatically.

•Navigate to the next menu layer by turning SHUTTLE to the right. Return to the previous menu layer by turning SHUTTLE to the left.

Reference page

Basic Functions 9