Connections for Various Functions
Connecting with CCTV camera, monitor and sensor
SENSOR |
| CCTV CAMERA |
|
| VIDEO OUT |
|
| VIDEO |
ALM IN | GND | IN |
ALM RST REC GND ALM MODE | CLK CALL |
IN | OUT |
REMOTE MIC | IN OUT | IN | OUT | RESET |
| AUDIO |
| VIDEO |
|
MICROPHONE
MIC | AUDIO | VIDEO |
IN | OUT | OUT |
VIDEO IN
AUDIO IN
MONITOR
Note
•Monitor to be connected
–Connecting with a CCTV monitor (for surveillance) is recommended.
–Connecting with some monitors may cause picture vibration and/or picture distortion at the top or bottom of the image at still picture or normal playback.
–A television for domestic use may easily cause the picture vibration and distortion.
•CCTV camera to be connected
–Do not connect ‘Color’ and ‘Black & White’ cameras together.
Alarm Recording Connection
The alarm can be confirmed from a distance by connecting the ALM OUT terminal with an existing alarm system panel or other peripherals such as a buzzer. Connect the VCR and other
peripherals as to the right. (
page 11 for the menu setting and page 36 for the rating of each terminal)
Alarm reset switch | External alarm lamp |
| and buzzer |
ALM RST REC GND ALM MODE | CLK CALL |
IN | OUT |
Alarm set switch
26 Installation
Note A point to notice | Info. Supplementary information |