American Dynamics ADV096HD Holiday set up, Alarm Recording, Special day of the week

Info.

•To erase a program:

Select the program number you wish to erase, turn SHUTTLE to the right (DW column flashes) and then turn SHUTTLE to the left.

Holiday set up

Up to 20 days per year can be set for Holiday for when the timer recording will be performed, or if HR in PROGRAM TO RECORD menu is set to SKIP, the timer recording will not be performed during the programmed period.

1.	Display <TIMER PROGRAM> menu.	<HOLIDAY SET UP>			03/22
2.	Turn JOG to select HOLIDAY SET UP	01/01	01/15	02/11
		07/20	09/15	09/23	10/10
		04/29	05/03	05/04	05/05
	and turn SHUTTLE to the right.	11/03	11/23	12/23	- - / - -
		- - / - - - - / - - - - / - - - - / - -

MONTH / DAY

• <HOLIDAY SET UP> menu

appears.

3. Turn JOG to move the cursor ( ) and

turn SHUTTLE to the right.

• Each time JOG is turned to the right, the cursor moves

towards right-forward direction.

Alarm Recording

If an alarm occurs, the VCR switches to alarm recording.

Alarm signal input

Example)
When ALARM REC MODE is set to L30H and		L30H
ALARM REC DURATION is 10 min.		Recording
	Recording	Alarm Recording
		10 min

page 26 for alarm recording connection

1. Press MENU button.

	<MAIN MENU>
• <MAIN MENU>appears.	DISPLAY
	TIMER PROGRAM
	RECORDING SET UP
	REAR TERMINAL
	MAINTENANCE
	CLOCK/FIRST TIME SET UP
2. Turn JOG to select RECORDING	<RECORDING SET UP>
SET UP and turn SHUTTLE to the		6H
	ALARM REC MODE
	ALARM REC DURATION	1M
right.	EMERGENCY REC	OFF
	SUPER RESOLUTION	ON
	ONE SHOT•FIELD	1

•<RECORDING SET UP> menu appears.

4.	Turn JOG to select the month you want, and turn SHUTTLE
	to the right.
5.	Turn JOG to select the day you want, and turn SHUTTLE to
	the right.
	Repeat steps 3 to 5 to set 2 or more days at once.
6.	Press MENU button.
	• The day and present time display appears on screen.

Info.

•To erase the pre-set month and day, turn SHUTTLE to the left while the month item is flashing.

Special day of the week

Set the recording period by specifying the start and end day of the week for timer recording.

3.When the cursor () is next to ALARM REC MODE, turn SHUTTLE to the right.

4.Turn JOG to set the alarm recording mode you want and turn SHUTTLE to the right.

5.Turn JOG to select ALARM REC DURATION and turn SHUTTLE to the right.

6.Turn JOG to set the alarm recording duration you want and turn SHUTTLE to the right.

<RECORDING SET UP>	6H
ALARM REC MODE
ALARM REC DURATION	1M
EMERGENCY REC	OFF
SUPER RESOLUTION	ON
ONE SHOT•FIELD	1
<RECORDING SET UP>	L30H
ALARM REC MODE
ALARM REC DURATION	1M
EMERGENCY REC	OFF
SUPER RESOLUTION	ON
ONE SHOT•FIELD	1
<RECORDING SET UP>	L30H
ALARM REC MODE
ALARM REC DURATION	1M
EMERGENCY REC	OFF
SUPER RESOLUTION	ON
ONE SHOT•FIELD	1
<RECORDING SET UP>	L30H
ALARM REC MODE
ALARM REC DURATION	10M
EMERGENCY REC	OFF
SUPER RESOLUTION	ON
ONE SHOT•FIELD	1

1.	Display <TIMER PROGRAM> menu.	<TIMER PROGRAM>
		PROGRAM TO RECORD
2.	Turn JOG to select SPECIAL DW and	HOLIDAY SET UP	MON-SAT
		SPECIAL DW

turn SHUTTLE to the right.

3.Turn JOG to set the start and end day of the week, and turn SHUTTLE to the right.

4.Press MENU button.

• The day and present time display appears on screen.

Note

•Start day of the week and end day of the week cannot be identical.

When the recording period of 2 or more programs are overlapped

The VCR always gives priority to the higher-numbered program.

Info.

•To make sure that the HOLIDAY SET UP setting is applied correctly, set a timer program with HLD in DW column to the higher-numbered program.

•When set to MAN 1, alarm recording continues until RST IN terminal is grounded.

•When set to MAN 2, alarm recording continues while ALM IN terminal is grounded.

7.Press MENU button.

•The day and present time display appears on screen.

Info.

•The index signal is automatically recorded when an alarm

recording begins. (The Index indicator ( ) flashes on the fluorescent display).

•Even if an alarm recording is proceeding, the new alarm recording starts when the next alarm signal is input. (While an index signal is being recorded and then the next alarm signal is input, the second signal may not be detected during skip or index search.)

•An alarm recording continues till its end during timer recording, even if the timer recording end-time reaches.

•An alarm recording will be cancelled if the tape reaches its end.

•If the interval between two alarm recording start-times is too short, the skip or index search may not function correctly.

( for the minimum interval between two alarm recording start-times, go to page 18)

Reference page

Advanced Functions 11