American Dynamics ADV096HD operation manual Adjustment during Playback, Frame or field playback

Page 21

Frame or field playback

1.To forward frames or fields one by one, turn JOG during still picture.

•Turn to the right to forward.

•Turn to the left to reverse.

To forward frames or fields continuously, keep turning JOG during still picture.

•Keep turning to the right to forward frames (fields) continuously.

•Keep turning to the left to reverse frames (fields) continuously.

To stop frame or field playback, release JOG.

•The playback picture stays at still.

Note

•Noise bars may appear on the picture while switching between forward and reverse frame or field playback.

Adjustment during Playback

Tracking adjustment

If noise appears in the picture during playback, reverse/forward slow playback, fast playback, reverse playback, frame or field playback, you can reduce or eliminate it by adjusting the tracking.

How to adjust during playback

1.Press TRACKING button (+) or (–)to achieve the best picture.

If noise appears

How to adjust during reverse/forward slow playback, fast playback, reverse playback, frame or field playback

1.During still picture, turn SHUTTLE to obtain the respective playback mode.

If noise appears in frame or field playback, set to slow playback.

2.While turning SHUTTLE, press PAUSE button.

• The playback picture is fixed at the selected speed.

3.Release SHUTTLE.

4.Press TRACKING button (+) or (–)to achieve the best picture.

Initializing the tracking

The tracking will be reset to its initial setting by pressing both TRACKING buttons (+) and (–)together during playback.

Note

•Adjust the tracking at each playback mode or the type of playback (fast playback, reverse playback etc.), since the method of tracking adjustment varies.

•Although the tracking is adjusted during reverse playback or reverse slow playback, the noise may remain on screen.

•When a picture recorded in 6H or 8H mode is played back in L18H, L24H, L30H or L40H mode, noise may appear on screen after the adjustment.

•The noise bars will move continuously when a TRACKING button is depressed.

Reference page

Picture quality adjustment

This control allows you to adjust the playback picture so that the outline is sharper or softer.

1.During playback, turn PICTURE control to the right or left.

•Turning to the right makes the picutre sharper.

•Turning to the left makes the picture softer.

SOFTSHARP

Vertical adjustment (picture vibration at the top and bottom)

The picture vibration during still picture, fast playback or playback at L18H-128H or 0H mode can be reduced or eliminated by the following steps.

How to adjust

1.Check that QUASI V-SYNC is ON. ( page 32)

2.Press PAUSE button during playback.

3.Press VERTICAL ADJUST button (+) or (–)to reduce or eliminate the picture vibration.

When the picture is vibrating

Initializing the vertical adjustment

The vertical adjustment will be reset to its initial setting by pressing both VERTICAL ADJUST buttons (+) and (–)together during still picture, fast playback or playback at L18H-128H or 0H mode.

Note

•Horizontal vibration cannot be corrected with VERTICAL ADJUST buttons.

•VERTICAL ADJUST buttons will not work, when QUASI V- SYNC of FIRST TIME SET UP menu is set to OFF.

•The picture vibration during still picture, frame or field playback may not be adjusted with VERTICAL ADJUST buttons.

Advanced Functions 17

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Super VHS ET Expansion Technology ADV096HDAvertissement Important Safeguards Important Safeguards IiiInformation Introduction Contents FeaturesControls and Functions Controls and Functions ALM Mode OUTRST RECBasic Functions Loading/Unloading a TapeRecording/playback time Manual RecordingAudio recording/playback Recording Check FunctionPlayback 32 for Tape END settingRewinding a tape Fast forwarding a tapeAdjusting the Clock When adjusting the clock to the exact secondJOG dial Shuttle ring Recording Techniques Advanced FunctionsProgram to Record menu appears Holiday set up Alarm RecordingSpecial day of the week Recording Techniques Display during alarm recordingEmergency Recording Series RecordingRemote Recording When the tape reaches its end during recordingRepeat Recording One shot/Interval RecordingSynchronous Recording Recording time modeVCR Number of camerasMemory backup in case of power failure Additional FeaturesDisplaying/clearing the alarm list After a power failureSpecial Effects Playback Additional FeaturesTracking adjustment Adjustment during PlaybackPicture quality adjustment Vertical adjustment picture vibration at the top and bottomCounter memory stop Searching TechniquesIndex search Skip searchTime Date Search menu appears Time date searchConfiguring the time lapse VCR RS-232C settingConnecting to a Personal Computer Command Commands set to the VCR Commands from personal computerStatus Response codes from the VCR Status Response codes from the VCR to outsideCommands and Responses Using with Personal Computer100=MAIN Menu =STOP, 1=REWIND, 2=REPEAT =SERIES, 1=REC-START/STOP =SYNC REC Error codeConnecting with Cctv camera, monitor and sensor InstallationAlarm Recording Connection Connections for Various FunctionsSeries Recording Connection Connection for External Time Clock AdjustmentRemote Recording Connection Synchronous Recording ConnectionSetting the Clock Setting the current time to exact secondExternal time clock adjustment Setting the Menus Menu ChartSet the menus by the following steps Press Menu button Setting the Menus Power Power Loss ListShotfield ShotintervalRS-232C Before Calling for Service SymptomRemedyOthers Playback Monitor Cause Remedy To turn off the indicator Self-diagnostic functionWhen the tape ends Lack of video signal inputCLK OUT signal Control Input/Output Signals and CircuitALM/RST/REC in terminals screw ALM/MODE/CALL OUT terminals screwGeneral SpecificationsPage Page 872C276B9 8200-0206-02
Top Page Image Contents