American Dynamics ADV096HD Additional Features, Memory backup in case of power failure

Page 19

Additional Features

Memory backup in case of power failure

This VCR includes a built-in backup memory, so the preset day and present time will remain in memory even if there is a power failure. However, if the power cord is disconnected for a long period of time (2-3 months), the present time may not be accurate. In this case, set the clock again.

Info.

• The battery is fully charged if the VCR’s power cord is

plugged into the outlet for 40 or more hours per week.

• If the battery is fully charged, even if the power cord is not

plugged in, the following settings will remain in memory for

up to 31 days:

– The day and present time display

–

Timer program

– Alarm list/Power loss list

– Number of tape uses/Elapsed time of the VCR

–

Counter display

 

Clearing the power loss list

 

 

 

1. Select POWER LOSS LIST CLEAR in

POWER LOSS LIST CLEAR

 

<MAINTENANCE> menu and turn

Turn the SHUTTLE RING

 

SHUTTLE to the right.

then POWER LOSS LIST

 

will be cleared.

2.Turn SHUTTLE to the left to clear the list.

• <MAINTENANCE> menu

appears.

To exit the menu without clearing the list, press MENU button.

3.Press MENU button.

•Once the list is cleared, the Power Loss indicator () will go off.

Displaying/clearing the alarm list

Displaying the alarm list

The alarm recording start time/date are logged in the VCR’s Alarm List. To view the list, please follow the steps listed below.

– Recording/Playback mode

Note

•When ALARM REC DURATION of the RECORDING SET UP menu is set to MAN1 or MAN2 and a power failure occurs during the alarm recording, the VCR may not return to the alarm recording mode when the power comes back on.

1.

Press MENU button.

 

•

<MAIN MENU> appears.

2.

Turn JOG to select MAINTENANCE

 

and turn SHUTTLE to the right.

 

•

<MAINTENANCE> menu

 

 

appears.

3.

Turn JOG to select ALARM LIST and

 

turn SHUTTLE to the right.

<MAINTENANCE> POWER LOSS LIST

ALARM LIST

ALL MENU INITIALIZE POWER LOSS LIST CLEAR ALARM LIST CLEAR

<REPEAT REC TIMES>

0

<ELAPSED TIME>

0H

<ALARM LIST>

0001 01-31-’01 00:00

0002

0003

After a power failure

If a power failure occurs during manual, timer or alarm recording, the VCR will return to the recording mode when the power comes back on. The Power Failure symbol (X) will be displayed for

01-01-’01 MON

00:00:00 X L30

•

<ALARM LIST> appears.

4. Press MENU button.

•

The day and present time appears

 

on screen.

Note

0004

0005

0006

0007

0008

about 1 minute on screen and the Power Loss indicator () will illuminate on the fluorescent display when the power comes back on. If a power failure occurs while the VCR’s power is on, the VCR will turn on by itself when the power comes back on.

•Maximum of 9,999 alarm recording start times will be counted.

•Up to 8 alarm recording start times/dates will be displayed. If more than 8 alarm recordings have occurred, the first start time and the last 7 start times will be displayed on the list.

Clearing the alarm list

 

1. Select ALARM LIST CLEAR in

ALARM LIST CLEAR

Displaying/clearing the power loss list

Displaying the power loss list

The power failure start time is logged in the VCR’s Power Loss List. To view the list, please follow the steps listed below.

1.

Press MENU button.

<MAINTENANCE>

 

 

•

<MAIN MENU> appears.

POWER LOSS LIST

 

 

ALL MENU INITIALIZE

 

 

 

 

ALARM LIST

 

2.

Turn JOG to select MAINTENANCE

POWER LOSS LIST CLEAR

ALARM LIST CLEAR

 

 

and turn SHUTTLE to the right.

<REPEAT REC TIMES>

0

 

•

<MAINTENANCE> menu

<ELAPSED TIME>

0H

 

 

 

 

 

appears.

<POWER LOSS LIST>

 

3.

Turn JOG to select POWER LOSS

 

01 01-31-’01 00:00

 

 

LIST and turn SHUTTLE to the right.

02

 

 

03

 

•<POWER LOSS LIST> appears.

4.Press MENU button.

•The day and present time appears on screen.

Note

•Up to 3 power failure start times will be displayed. If more than 3 failures have occurred, the first start time and the last 2 start times will be displayed on the list.

Reference page

<MAINTENANCE> menu and turn

Turn the SHUTTLE RING

SHUTTLE to the right.

then ALARM LIST will be

cleared.

2.Turn SHUTTLE to the left to clear the list.

•<MAINTENANCE> menu appears.

To exit the menu without clearing the list, press MENU button.

3.Press MENU button.

•Once the list is cleared, the Alarm Recording indicator

() on the fluorescent display will go off.

Advanced Functions 15

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Super VHS ET Expansion Technology ADV096HDAvertissement Important Safeguards Iii Important SafeguardsInformation Introduction Contents FeaturesControls and Functions Controls and Functions REC Mode OUTALM RSTBasic Functions Loading/Unloading a TapeRecording Check Function Manual RecordingRecording/playback time Audio recording/playbackFast forwarding a tape 32 for Tape END settingPlayback Rewinding a tapeWhen adjusting the clock to the exact second Adjusting the ClockJOG dial Shuttle ring Advanced Functions Recording TechniquesProgram to Record menu appears Alarm Recording Holiday set upSpecial day of the week Series Recording Display during alarm recording Recording Techniques Emergency RecordingOne shot/Interval Recording When the tape reaches its end during recordingRemote Recording Repeat RecordingNumber of cameras Recording time modeSynchronous Recording VCRAfter a power failure Additional FeaturesMemory backup in case of power failure Displaying/clearing the alarm listSpecial Effects Playback Additional FeaturesVertical adjustment picture vibration at the top and bottom Adjustment during PlaybackTracking adjustment Picture quality adjustmentSkip search Searching TechniquesCounter memory stop Index searchTime Date Search menu appears Time date searchRS-232C setting Configuring the time lapse VCRConnecting to a Personal Computer Status Response codes from the VCR to outside Commands from personal computerCommand Commands set to the VCR Status Response codes from the VCRCommands and Responses Using with Personal Computer100=MAIN Menu =STOP, 1=REWIND, 2=REPEAT =SERIES, 1=REC-START/STOP =SYNC REC Error codeConnections for Various Functions InstallationConnecting with Cctv camera, monitor and sensor Alarm Recording ConnectionSynchronous Recording Connection Connection for External Time Clock AdjustmentSeries Recording Connection Remote Recording ConnectionSetting the current time to exact second Setting the ClockExternal time clock adjustment Menu Chart Setting the MenusSet the menus by the following steps Press Menu button Setting the Menus Shotinterval Power Loss ListPower ShotfieldRS-232C SymptomRemedy Before Calling for ServiceOthers Playback Lack of video signal input Self-diagnostic functionMonitor Cause Remedy To turn off the indicator When the tape endsALM/MODE/CALL OUT terminals screw Control Input/Output Signals and CircuitCLK OUT signal ALM/RST/REC in terminals screwGeneral SpecificationsPage Page 872C276B9 8200-0206-02
Top Page Image Contents