American Dynamics ADV096HD operation manual Controls and Functions

Page 8

Controls and Functions (Cont.)

Fluorescent Display

(Counter Memory Stop/Month) indicator

Illuminates during the counter memory stop.

Also, illuminates when the month (of time and date) is being entered via the front panel.

(Power Loss) indicator

Illuminates when the VCR is turned on after a power failure occurs during recording.

(Alarm Recording) indicator

Flashes during alarm recording and stays on when the alarm recording is finished.

(Time Date Search/Day) indicator

Illuminates during the time date search.

Also, illuminates when the day (of time and date) is being entered via the front panel.

(Index Search) indicator

Flashes when recording an index signal and illuminates during the index number setup and the index search. (Index number is shown on the Recording and Playback Mode display.)

(Skip Search) indicator

Illuminates during the skip search.

(Daylight Saving Time) indicator

Illuminates when “DAYLIGHT SAVINGS” is set to “ON”.

, (Tape Speed) indicator

Indicates the tape speed.

SP is standard play; EP is extended play.

(Super Resolution) indicator

Illuminates during the recording, during the playback using a tape recorded in Super Resolution mode and when a tape recorded in Super Resolution mode is inserted to the VCR, providing “SUPER RESOLUTION” in “RECORDING SET UP” menu is set to “ON”.

(Repeat) indicator

Illuminates when “TAPE END” in “FIRST TIME SET UP” menu is set to “REPEAT” or “ALARM•PROT”.

(Cassette Status) indicator

Illuminates when a tape is inserted.

(Timer Recording) indicator

Illuminates when the VCR is in stand-by for timer recording or during timer recording.

(Tape Remaining) indicator

Indicates the position on the tape. S indicates the Start of the tape and E indicates the End of the tape.

Counter/Clock display

While the VCR is turned on, indicates the relative position on the tape. (The Counter stops counting where no recording is made on the tape.) When it is off, (when set) the clock (24- hour format) is shown.

Recording and Playback Mode/Index Number display

Displays the number corresponding to a selected recording or playback mode. The mode shown here varies by the “TAPE LENGTH” setting (T-120 or T-160) setting in “FIRST TIME SET UP” menu. Also, displays the index number during the index number setup and the index search.

(Emergency Recording) indicator

Illuminates when “EMERGENCY REC” in “RECORDING SET UP” menu is set to “ON”.

Lock/Lock All indicator

: illuminates when all buttons (except REC button and EJECT button) are locked.

: illuminates when all buttons are locked.

(Playback) indicator

Illuminates during playback.

(Recording) indicator

Illuminates during recording.

4 Introduction

Note A point to notice

Info. Supplementary information

Page 7 Page 9
Image 8
Page 7 Page 9
Contents ADV096HD Super VHS ET Expansion TechnologyAvertissement Important Safeguards Information Important SafeguardsIii Introduction Features ContentsControls and Functions Controls and Functions Mode OUT ALMRST RECLoading/Unloading a Tape Basic FunctionsManual Recording Recording/playback timeAudio recording/playback Recording Check Function32 for Tape END setting PlaybackRewinding a tape Fast forwarding a tapeJOG dial Shuttle ring Adjusting the ClockWhen adjusting the clock to the exact second Program to Record menu appears Recording TechniquesAdvanced Functions Special day of the week Holiday set upAlarm Recording Display during alarm recording Recording TechniquesEmergency Recording Series RecordingWhen the tape reaches its end during recording Remote RecordingRepeat Recording One shot/Interval RecordingRecording time mode Synchronous RecordingVCR Number of camerasAdditional Features Memory backup in case of power failureDisplaying/clearing the alarm list After a power failureAdditional Features Special Effects PlaybackAdjustment during Playback Tracking adjustmentPicture quality adjustment Vertical adjustment picture vibration at the top and bottomSearching Techniques Counter memory stopIndex search Skip searchTime date search Time Date Search menu appearsConnecting to a Personal Computer Configuring the time lapse VCRRS-232C setting Commands from personal computer Command Commands set to the VCRStatus Response codes from the VCR Status Response codes from the VCR to outsideUsing with Personal Computer Commands and Responses100=MAIN Menu =STOP, 1=REWIND, 2=REPEAT Error code =SERIES, 1=REC-START/STOP =SYNC RECInstallation Connecting with Cctv camera, monitor and sensorAlarm Recording Connection Connections for Various FunctionsConnection for External Time Clock Adjustment Series Recording ConnectionRemote Recording Connection Synchronous Recording ConnectionExternal time clock adjustment Setting the ClockSetting the current time to exact second Set the menus by the following steps Press Menu button Setting the MenusMenu Chart Setting the Menus Power Loss List PowerShotfield ShotintervalRS-232C Others Before Calling for ServiceSymptomRemedy Playback Self-diagnostic function Monitor Cause Remedy To turn off the indicatorWhen the tape ends Lack of video signal inputControl Input/Output Signals and Circuit CLK OUT signalALM/RST/REC in terminals screw ALM/MODE/CALL OUT terminals screwSpecifications GeneralPage Page 872C276B9 8200-0206-02
Top Page Image Contents