Remote Recording
This function permits you to control the start/end of recording from the remote place. The VCR starts recording while the REC IN terminal is grounded.
1. Display <REAR TERMINAL> menu.
2. Set REC IN to REC-START/STOP.
3.Press MENU button.
•The day and present time display appears on screen.
page 27 for remote recording connection.
Note
•An index signal will not be recorded during remote recording.
•Series or timer recording function cannot be used with remote recording at the same time.
Repeat Recording
With this function, when the tape reaches its end during recording, the VCR rewinds the tape and starts recording again.
1. Press MENU button.
•
When the tape reaches its end during recording
The following functions are automatically engaged when the tape ends during recording.
TAPE END | When there are alarm | When there is NO alarm | |
setting | recordings on tape | recording on tape | |
|
|
| |
|
| The tape is rewound | |
ALARM• | The tape stops.(*) | automatically to the | |
PROT | beginning and then | ||
| |||
|
| recording is resumed. | |
|
|
| |
STOP | The tape stops. |
| |
|
|
| |
| The tape is rewound automatically to the | ||
REWIND | beginning (except in timer recording) and | ||
| then stops. |
| |
|
|
| |
| The tape is rewound automatically to the | ||
REPEAT | beginning and then recording is resumed | ||
| (also recording over existing alarms). | ||
|
|
| |
*To repeat recording on the same tape again, eject the tape once and reinsert.
One shot/Interval Recording
One shot recording allows you to control the number of fields to be recorded when the REC button is pressed or the REC IN terminal is grounded. Interval recording is made at the selected
2. Turn JOG to select CLOCK/FIRST |
TIME SET UP and turn SHUTTLE to |
the right. |
• <FIRST TIME SET UP> menu |
appears. |
<FIRST TIME SET UP> |
|
TIME DATE ADJUST | STOP |
TAPE END | |
QUASI | ON |
VIDEO MODE | AUTO |
TAPE LENGTH | |
BUZZER | WRNG |
number of fields and at the selected interval.
1.Press REC/PLAY MODE button on the front panel to set the recording mode to 0H.
3. | Turn JOG to select TAPE END and |
| turn SHUTTLE to the right. |
4. | Turn JOG to select REPEAT or |
| ALARM•PROT and turn SHUTTLE to |
| the right. |
| Refer to the table below for |
| REPEAT and ALARM•PROT. |
| Repeat indicator ( ) illuminates |
| on the fluorescent display. |
<FIRST TIME SET UP> |
|
TIME DATE ADJUST | STOP |
TAPE END | |
QUASI | ON |
VIDEO MODE | AUTO |
TAPE LENGTH | |
BUZZER | WRNG |
<FIRST TIME SET UP> |
|
TIME DATE ADJUST | REPEAT |
TAPE END | |
QUASI | ON |
VIDEO MODE | AUTO |
TAPE LENGTH | |
BUZZER | WRNG |
2. | Press MENU button. |
| • <MAIN MENU> appears. |
3. | Turn JOG to select RECORDING SET |
| UP and turn SHUTTLE to the right. |
| • <RECORDING SET UP> menu |
| appears. |
4. | Turn JOG to select ONE |
| SHOT•FIELDand turn SHUTTLE to |
| the right. |
<MAIN MENU>
DISPLAY
TIMER PROGRAM RECORDING SET UP REAR TERMINAL MAINTENANCE
<RECORDING SET UP> | 6H |
ALARM REC MODE | |
ALARM REC DURATION | 1M |
EMERGENCY REC | OFF |
SUPER RESOLUTION | ON |
ONE SHOT•FIELD | 1 |
ALARM REC DURATION | 1M |
EMERGENCY REC | OFF |
SUPER RESOLUTION | ON |
ONE SHOT•FIELD | 1 |
ONE SHOT•INTERVAL | 10S |
5.Press MENU button.
• The day and present time display appears on screen.
5. | Turn JOG to select the number of |
| recording field and turn SHUTTLE to |
| the right. |
6. | Turn JOG to select ONE |
| SHOT•INTERVALand turn SHUTTLE |
ALARM REC DURATION | 1M |
EMERGENCY REC | OFF |
SUPER RESOLUTION | ON |
ONE SHOT•FIELD | 5 |
ONE SHOT•INTERVAL | 10S |
ALARM REC DURATION | 1M |
EMERGENCY REC | OFF |
SUPER RESOLUTION | ON |
ONE SHOT•FIELD | 5 |
ONE SHOT•INTERVAL | 10S |
to the right.
For one shot recording, setup step 7 only:
7.Turn JOG to select SHOT and turn SHUTTLE to the right.
For interval recording, setup step 8 only:
8.Turn JOG to select the recording interval and turn SHUTTLE to the right.
9.Press REC button.
ALARM REC DURATION | 1M |
EMERGENCY REC | OFF |
SUPER RESOLUTION | ON |
ONE SHOT•FIELD | 5 |
ONE SHOT•INTERVAL | SHOT |
ALARM REC DURATION | 1M |
EMERGENCY REC | OFF |
SUPER RESOLUTION | ON |
ONE SHOT•FIELD | 5 |
ONE SHOT•INTERVAL | 30S |
•The one shot recording will be on standby mode.
•The VCR starts the interval recording with the interval time selected in step 6 above.
10.To start one shot recording, press REC button again or switch the REC IN terminal on the rear panel to the ground.
Reference page