American Dynamics ADV096HD operation manual Controls and Functions

Page 7

Controls and Functions

Front View

POWER button

Press to turn the VCR POWER on or off.

The Power indicator illuminates when the VCR is turned on.

EJECT button

Press to remove the cassette.

Cassette Loading Slot

Cassette is inserted in this slot for loading.

REC button

Press to begin recording.

JOG dial

Use to forward/reverse a tape frame-by-frame (field-by-field) or to set the menus.

SHUTTLE ring

When the VCR is in stop mode, turn to the right to forward a tape or to the left to rewind.

Also, use for special effects playback or to set the menus.

PICTURE control

The picture quality can be adjusted between soft and sharp.

Lock button

Press to lock the VCR’s front panel buttons from user activity.

REC/PLAY MODE buttons

Press to select the recording or playback speed.

TRACKING buttons

Press to reduce/eliminate the noise during playback, slow playback etc.

POSITION/VERTICAL ADJUST buttons

•When the day and present time display is shown on the monitor screen, press the top button to move the display to the right forward or bottom button to move it down.

During an alarm recording or if an warning is displayed on screen, the day and present time display cannot be moved.

•If screen images are blurred vertically during still picture or special effects playback, press to reduce/eliminate the picture vibration, (QUASI V-SYNC “ON”).

Fluorescent Display

next page

COUNTER RESET button

Press to reset the counter to “00000”.

SEARCH button

Press to display the <SEARCH FUNCTION> menu.

TIMER REC button

Press to start timer recording, when you have programmed your VCR to record.

PLAY/REC CHECK button

When the VCR is in stop mode, press to playback a previously recorded tape.

During recording, press for more than 1.5 seconds to check recording function.

PAUSE/SHUTTLE HOLD button

During recording, press to stop the tape movement temporarily. Press again to continue the recording. During playback, press to obtain a still picture.

During special effects playback using SHUTTLE ring, press to fix the playback speed.

STOP button

Press to stop all tape related functions.

MENU/TIME DATE ADJUST button

When the VCR is turned on, press to display the <MAIN MENU>. Press again to exit the menu.

When the VCR is turned off, press this button for more than 3 seconds to adjust the VCR’s time and date.

Reference page

Introduction 3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Super VHS ET Expansion Technology ADV096HDAvertissement Important Safeguards Iii Important Safeguards Information Introduction Contents FeaturesControls and Functions Controls and Functions REC Mode OUTALM RSTBasic Functions Loading/Unloading a TapeRecording Check Function Manual RecordingRecording/playback time Audio recording/playbackFast forwarding a tape 32 for Tape END settingPlayback Rewinding a tapeWhen adjusting the clock to the exact second Adjusting the ClockJOG dial Shuttle ring Advanced Functions Recording TechniquesProgram to Record menu appears Alarm Recording Holiday set upSpecial day of the week Series Recording Display during alarm recordingRecording Techniques Emergency RecordingOne shot/Interval Recording When the tape reaches its end during recordingRemote Recording Repeat RecordingNumber of cameras Recording time modeSynchronous Recording VCRAfter a power failure Additional FeaturesMemory backup in case of power failure Displaying/clearing the alarm listSpecial Effects Playback Additional FeaturesVertical adjustment picture vibration at the top and bottom Adjustment during PlaybackTracking adjustment Picture quality adjustmentSkip search Searching TechniquesCounter memory stop Index searchTime Date Search menu appears Time date searchRS-232C setting Configuring the time lapse VCRConnecting to a Personal Computer Status Response codes from the VCR to outside Commands from personal computerCommand Commands set to the VCR Status Response codes from the VCRCommands and Responses Using with Personal Computer100=MAIN Menu =STOP, 1=REWIND, 2=REPEAT =SERIES, 1=REC-START/STOP =SYNC REC Error codeConnections for Various Functions InstallationConnecting with Cctv camera, monitor and sensor Alarm Recording ConnectionSynchronous Recording Connection Connection for External Time Clock AdjustmentSeries Recording Connection Remote Recording ConnectionSetting the current time to exact second Setting the ClockExternal time clock adjustment Menu Chart Setting the MenusSet the menus by the following steps Press Menu button Setting the Menus Shotinterval Power Loss ListPower ShotfieldRS-232C SymptomRemedy Before Calling for ServiceOthers Playback Lack of video signal input Self-diagnostic functionMonitor Cause Remedy To turn off the indicator When the tape endsALM/MODE/CALL OUT terminals screw Control Input/Output Signals and CircuitCLK OUT signal ALM/RST/REC in terminals screwGeneral SpecificationsPage Page 872C276B9 8200-0206-02
Top Page Image Contents