Setting the Menus
Menu Chart
The Day and Present Time Display
<MAIN MENU>
DISPLAY
TIMER PROGRAM RECORDING SET UP REAR TERMINAL MAINTENANCE CLOCK/FIRST TIME SET UP
Use JOG to select, and ENTER.
Press MENU to exit.
<DISPLAY> | 2 |
DISPLAY MODE | |
TIME DATE SIZE | SMALL |
BLUE BACK | OFF |
e.g.<MODE 2>
<TIMER PROGRAM> 
PROGRAM TO RECORD
HOLIDAY SET UP | |
SPECIAL DW |
<RECORDING SET UP> | 6H |
ALARM REC MODE | |
ALARM REC DURATION | 1M |
EMERGENCY REC | OFF |
SUPER RESOLUTION | ON |
ONE SHOT•FIELD | 1 |
ONE SHOT•INTERVAL | SHOT |
<REAR TERMINAL>
CALL OUT | WRNG•TAPE END |
CLOCK OUT | REC- 1 |
MODE OUT | REC |
REC IN | SERIES |
<MAINTENANCE> 
POWER LOSS LIST
ALARM LIST
ALL MENU INITIALIZE POWER LOSS LIST CLEAR ALARM LIST CLEAR
<REPEAT REC TIMES> | 0 |
<ELAPSED TIME> | 0H |
<FIRST TIME SET UP> |
|
TIME DATE ADJUST | STOP |
TAPE END | |
QUASI | ON |
VIDEO MODE | AUTO |
TAPE LENGTH | |
BUZZER | WRNG |
|
<PROGRAM TO RECORD> | HR | <POWER LOSS LIST> | |||||
| DW | START | END | 01 | 00:00 | ||
1 | DAY | 12:00 | 15:00 | L30EP | 02 |
|
|
2 | TUE | 12:00 | 15:00 | L18EP | 03 |
|
|
3 | WED | 12:00 | 15:00 | 6EP |
|
|
|
4 | THU | 12:00 | 15:00 | 6EP |
|
|
|
5 | FRI | 12:00 | 15:00 | L30EP |
|
|
|
6 | HLD | 12:00 | 15:00 | SKIP |
|
|
|
7 | SUN | 12:00 | 15:00 | L30EP |
|
|
|
8 | SPL | 20:00 | 22:00 | SKIP |
|
|
|
<HOLIDAY SET UP> | 03/22 | <ALARM LIST> | 00:00 | ||||
| 01/01 | 01/15 | 02/11 | 0001 | |||
| 04/29 | 05/03 | 05/04 | 05/05 | 0002 |
|
|
| 07/20 | 09/15 | 09/23 | 10/10 | 0003 |
|
|
| 11/03 | 11/23 | 12/23 | - | 0004 |
|
|
| - | - | - | 0005 |
|
| |
| MONTH / DAY |
|
| 0006 |
|
| |
|
|
|
|
| 0007 |
|
|
|
|
|
|
| 0008 |
|
|
ALL MENU INITIALIZE
Turn the SHUTTLE RING
then all MENU will be initialized.
POWER LOSS LIST CLEAR
Turn the SHUTTLE RING 
then POWER LOSS LIST will be cleared.
<TIME DATE ADJUST> | OFF | ALARM LIST CLEAR |
DAYLIGHT SAVINGS | Turn the SHUTTLE RING | |
MONTH | 01 | |
DAY | 01 | then ALARM LIST will be |
YEAR | 2001 | cleared. |
TIME | 00:00:00 |
|
1200 | |
TRANSMISSION RATE | |
DATA BIT LENGTH | 8BIT |
STOP BIT LENGTH | 1BIT |
PARITY BIT | NONE |
DELIMITER<SEND> | CR•LF |
DELIMITER<RECEIVE> | CR |
VCR ADDRESS | NONE |
Set the menus by the following steps.
1.Press MENU button.
•<MAIN MENU> appears.
2.Turn JOG to the left or right to select the desired item.
•When turned to the right, the cursor moves downward.
•When turned to the left, the cursor moves upward.
3.Turn SHUTTLE to the right.
•The desired item is selected and the menu appears.
4.Turn JOG to the left or right to select item.
5.Turn SHUTTLE to the right, then the setting item flashes.
6.Turn JOG to the left or right to change the setting.
7.Turn SHUTTLE to the right to set.
8.Press MENU button.
•The day and present time display appears.
Reference page
JOG dial
SHUTTLE ring
MENU button