2.4 Rear Panel Layout
|
| Fig 2.5 Rear Panel | |
|
|
| |
Item | Name | Description | |
1 | PTZ | Connect to speed dome. Y means “+”, Z means | |
2 | K/B | Connect to PTZ keyboard | |
3 | ALARM IN | Connect to external sensors | |
4 | NET | Network port | |
5 | VGA port | VGA output, connect to monitor | |
6 | Video out | Connect to TV/monitor | |
7 | Video in | Video input channels from | |
8 | Audio in | 4 Channels Audio input | |
9 | POWER SWITCH | Power on/off | |
10 | + 5V and GND | +5 V and Grounding | |
11 | ALARM OUT | ||
12 | USB port | To connect external USB devices like USB flash, USB HDD | |
for backup or update firmware. | |||
|
| ||
13 | Spot out | Connect to monitor as an AUX output channel by channel. | |
Only video display, no menu | |||
|
| ||
14 | Audio out | Audio output, connect to amplified speaker | |
15 | POWER INPUT | DC12V | |
16 | FAN | For cooling the device | |
|
| Tab 2.1 Back Panel Ports |
2.5 Remote Control
Uses two AAA size batteries, to install batteries:
Step1: Open the battery cover of the Remote Control
Step2: Insert batteries. Position the poles (+ and
Step3: Replace the battery cover
Notice: If the remote does not work:
1.Check batteries poles
2.Check the remaining charge in the batteries
3.Check to see if IR controller sensor on DVR is blocked
If it still doesn't work, contact the
9