Q-See QT528 user manual

Page 2

CAUTION

Please read this user manual carefully to ensure that you can use the device correctly and safely

The contents of this manual are subject to change without notice

This device should be used with the power supply provided. If the DVR is not going to be used for an extended period of time unplug it.

Do not install this device near any heat sources such as radiators, heat registers, stoves or other device that produce heat.

Do not install this device where it is exposed to water. Clean only with a dry cloth

Do not block any ventilation openings; make sure there is good ventilation around the DVR.

Do not power off the DVR while it is recording! The correct procedure is to stop recording first by selecting the “shut-down” button at the right of the menu bar to exit, and finally to cut off the power.

This machine is designed for indoor use. Do not expose the machine to rain or a moist environment. If any objects or liquids get into the machine’s case, please cut off the power supply immediately, and have qualified technicians check the machine before restarting.

Refer all servicing to qualified service personnel other then replacing hard drives or batteries.

1

Image 2
Contents QT528 Page Table of Contents Appendix B Calculate Recording Capacity CIF DVR Introduction Main FeaturesIntroduction Alarm Connecting to a monitor or TV Getting StartedConnect HDD Installing Hard DriveScrew in the HDD Install DVD Writer Connect the DVD WriterFront Panel DescriptionRear Panel Layout Rear PanelControl with Mouse Connect Mouse Remote ControlFunction Use Mouse In Live SetupBackup PlaybackBasic Function Login Figure icon Motion eventLive Playback Main Menu Setup Guide Basic Configuration Time & Date 3 DSTLive Configuration LiveHost Monitor SpotMask Definitions and descriptions of Record Parameter Meaning Record ConfigurationEnable Definition Record streamDefinitions and descriptions of Record stream Time Recycle RecordSchedule Configuration StampSchedule MotionAlarm Configuration Sensor① Basic Sensor to setup optional external motion sensors② Alarm Handling ③ Schedule 23 Alarm Configuration-Motion 25 Alarm Configuration-Schedule Other Alarm Alarm OutNetwork Configuration Static IP Definitions and descriptions of network configurationNetwork PPPoEDefinitions and descriptions of network stream Ddns serverSub Stream 4Other settings User Management Configuration Ddns serverP.T.Z configuration  Serial PortDefinitions and descriptions of PTZ Parameter Meaning  Advance38 P.T.Z Configuration-Advance 40 Preset Set-Setting Advanced Block/Allow list Import/ExportPlayback Buttons RECORD, SEARCH, Playback and BackupTime Search Event Search File ManagerBackup Information System Information DVR ManagementChecking System Information Event InformationOnline Information Log InformationNetwork information Disk Manager Manual AlarmUpgrade LogoffRemote Surveillance Network AccessSetting Up Remote Access Dhcp Static IP PPPoE Setting up MYQ-SEE Ddns Registration Domain Name Setup Connect your DVR to the Router and power on DVR Port ForwardingPage Page Verify that the ports is open After your ISP unblocks those ports for you, repeat steps i Pic Click on Custom Level Connect to same Router as your DVR Using the Remote Access Software Snap Pictures Color Adjustment Remote Playback and Backup By Time Search27 Time Search Interface By Event Search File ManagementRemote Backup Remote System Configuration32 Remote Menu Setup Mobile Surveillance Phones with Windows Mobile ProPage Phones with Symbian Page For iPhone Mobile Clients Installing through iphone Install through PCOperation Instruction for iphone clients Login interface Device information 【Live 】 Live view 【Settings 】 Software settingDevice list Software help centerServer list Interface Config interface Image view interface Record Playback interfaceDisplay config: Information View InterfaceSoftware Installation 4For Android Mobile Clients【Image】 Image view 【Live】 Live view File 【Log】 Device list 【Settings】 Software setting 【Information】Main menu 【Playback】 【Help】Image view Record playback Server listPath Installation instruction for BlackBerry Mobile phone Client Requires Blackberry OSOperation method for Blackberry mobile phone client Login Main interface PlaybackLive view Software configuration Information view Product Specifications Device Parameter SpecificationQ6. I cannot record, what could be the problem? Q5. Cannot find HDDQ10 How do I input password and digital numbers? VGADirectx Bandwidth Appendix B Calculate Recording Capacity D1 Appendix B Calculate Recording Capacity CIF Compatible USB drive after test Brand Capacity Tab C.1 Compatible CD/DVD writersPage Customer Information Card
Related manuals
Manual 3 pages 62.37 Kb Manual 3 pages 28.6 Kb