Q-See QT528 user manual Record Configuration, Enable

4.3 Record Configuration

Record configuration includes five sub menus: enable, record bit rate, time, recycle record and stamp.

4.3.1 Enable

Step 1: Enter into system configurationrecord configurationenable; refer to Fig 4-11:

Fig 4-11 Record Configuration-Enable

Step 2: Checkmark record, audio and record time

Step 3: User can setup all channels with same parameters, checkmark “all”, then do relevant setup.

Step 4: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current interface.

Definitions and descriptions of Record:

Parameter	Meaning
Record	Switch Record on or off
Audio	Enable live audio recording
Redundancy

21