Click on Custom Level
Pic 12
On “Reset to” pull down menu, select “LOW” then
click on “RESET” button.
Click ‘Yes’ when asked: ‘Are you sure you want to change the setting for this zone?’ Click OK. Click Apply. Click OK. Close Internet Explorer.
Pic 13
5If you get a error message that says the program cannot load because the publisher is unknown or the program is unsigned, go to internet explorer, tools, internet options (refer to Pic 9), then go to the “Advanced” tab (RED box in Pic 14), this will open the window in Pic 15, scroll down to “Security”, and select the options to “Allow software to run or install even if the signature is invalid”, and “Allow Active Content to Run Files on My Computer” (RED box in Pic 15).
Pic 14 | Pic 15 |
To connect to the DVR from the remote computer you would then open an Internet Explorer browser window and enter the internet IP of your router that you got by going to www.myipaddress.com (you have to do this from a PC that
62