Q-See QT528 user manual Definitions and descriptions of Record stream

4.3.2 Record stream

Step 1: Enter into system configurationrecord configurationrecord bit rate; refer to Fig 4-12:

Fig 4-12 Record Configuration-Record Bit Rate

Step 2: Setup rate, resolution, quality, encode and max bit stream

Step 3: User can setup all channels with same parameters, checkmark “All”, then to do relevant setup.

Step 4: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current interface.

Note: if you set a value that is higher than maximum supported by the device, the value will be adjusted automatically.

Definitions and descriptions of Record stream:

Parameter	Definition
FPS	Range from 1-30 (NTSC) 1-25 (PAL)
Rate	Range from: 1-30（NTSC）1-25(PAL)
Resolution	CIF or D1 Each camera can use either resolution option
Quality	The quality of recorded images. The higher the value, the clearer the
	recorded image is. Six options: lowest, lower, low, medium, higher and
	highest.
Encode	VBR and CBR
Max bit	Range from: 64 Kbps、128 Kbps、256 Kbps、512 Kbps、768 Kbps、1Mbps、
stream	2 Mbps

22