Q-See QT528 user manual Alarm Configuration-Schedule

user can adjust its value according to the practical conditions; click icon, set the whole area as detection area;

click icon, the set detection area will be cleared; click icon, user can test whether the sensitivity value and

motion area are suitable to current conditions（refer to following picture）; Click icon, to save the setting; click icon, exit current interface.

Note: when user drags mouse to set motion detection area, they have to click icon to clear current detection area first, and then set the area.

Step 6: User can setup all channels with same parameters, checkmark “all”, then to do relevant setup.

Step 7: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current interface.

②Schedule

Step 1: Enter into system configurationalarm configurationschedule; refer to Fig 4-25:

Fig 4-25 Alarm Configuration-Schedule

Step 2: The setup steps of alarm schedule are similar to schedule; user can refer to 4.4.1 Schedule for details.

Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.

Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.

4.5.3 Video Loss

30