Q-See QT528 user manual Installing Hard Drive, Connect HDD, Screw in the HDD Install DVD Writer

2.2 Installing Hard Drive

Notice: 1. This DVR supports two SATA hard drivers or one SATA hard drive plus one DVD-RW Writer.

2.Please calculate HDD capacity according to the recording setting. Please refer to “Appendix B Calculate Recording Capacity”.

Step1: Unscrew and Open the top cover

Step2: Connect the power and data cables. Place the HDD onto the bottom case as below.

Fig 2.1 Connect HDD

Step3: Screw the HDD as below.

Note: For the convenience to install, please connect the power and data cables firstly, and then screw to fix.

Fig 2.2 Screw in the HDD

Note: For easier installation, please connect the power and data cables first, and then screw the HDD to base.

2.2.1 Install DVD Writer

Notice: 1. The writer should be on the compatible devices we recommend. Please refer to “Appendix C Compatible Devices”. Others may work, but these are the only ones we have tested.

2.This device is only for backup Step1: Unscrew and Open the top cover

Step2: Connect the power and data cables. Place the DVD writer onto the bottom case as shown in Fig 2.3.

Step3: Screw in the DVD writer in Fig 2.4:

Fig 2.3 Connect the DVD Writer Fig 2.4 Screw in the Writer

7