4.6.1 Network
Step 1: Enter into system configurationnetwork configurationnetwork; refer to Fig
Fig
Step 2: HTTP port: the default value is 80. If this value is changed, user needs to add the port number when typing IP
address in IE address blank .i.e. set HTTP port to 82, IP address: http://192.168.0.25, user needs to input this
address: http://192.168.0.25:82 into IE browser. Server port: communication port
Step 3: Checkmark the "Obtain IP address automatically", the device will receive IP address, subnet mask, gateway IP from the router the DVR is attached to.
Step 4: Enable PPPOE, user can directly connect the DVR to internet via ADSL, then input the user name and password; click TEST button to test the effectiveness of supplied information. You will need to get the account information from your internet service provider.
Step 5: Enable DDNS server: user needs to input user name, password and host domain name of the registered website, click TEST to test the effectiveness of information you input.
Step 6: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
3. Definitions and descriptions of network configuration:
Parameter | Meaning |
HTTP port | Port to access from IE browser. The default port is 80 |
Server | The port number for data. The default port is 6036 |
port |
|
| Static IP |
IP address | The IP address of the DVR |
Subnet | The subnet mask of the server |
mask |
|
Gateway | The gateway of the router |
DNS | The address of DNS server |
server |
|
| PPPoE |
| 33 |