4.5.1 Sensor (to setup optional external motion sensors)
Sensor includes three sub menus: basic, alarm handling and schedule.
①Basic
Step 1: Enter into system configurationalarm configurationsensorbasic; refer to Fig
Fig
Step 2: Enable sensor alarm, set the alarm type according to triggered alarm type. Two options: NO (normally open) and NC (normally closed).
Step 3: User can setup all channels with same parameters, checkmark “all”, then to do relevant setup.
Step 4: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
②Alarm Handling
Step 1: Enter into system configurationalarm configurationsensoralarm handling; refer to Fig
Fig
Step 2: Select hold time, click Trigger button, and a dialog box will
27